# Synthetic rubber: Energy footprint

Source page: https://www.materialinsights.org/technologies/synthetic_rubber_process/tech-energy-footprint/

#### Energy in use

The energy it uses or converts while it works, and how efficiently

**Consumption**
: None in use; making it needs heat and power for monomer production and polymerisation

**Conversion**
: Wartime GR-S was made by emulsion polymerisation at about 41 °C ^[3]

**Note**
: No source opened gives energy figures per tonne of synthetic rubber.

as of 2026-11-12

#### Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back
 Consumes

- [Ht Heat](https://www.materialinsights.org/energy/heat/) The GR-S emulsion reaction ran at 41 °C, so the reactors were held at a set warm temperature ^[3].

as of 2026-11-12

#### Sources

1. [Synthetic Rubber for World War II and After (Stacy Fang)](https://learncheme.com/wp-content/uploads/Prausnitz/OldandNewChemicalProcesses/Synthetic Rubber.pdf) LearnChemE, University of Colorado Boulder (student paper in the Old and New Chemical Processes collection; no date shown)

## Other sections

- [Summary](https://www.materialinsights.org/technologies/synthetic_rubber_process/index.md)
- [Overview](https://www.materialinsights.org/technologies/synthetic_rubber_process/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/synthetic_rubber_process/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/synthetic_rubber_process/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/synthetic_rubber_process/tech-materials/index.md)
- [Industries](https://www.materialinsights.org/technologies/synthetic_rubber_process/tech-industries/index.md)
