# Tower crane: Overview

Source page: https://www.materialinsights.org/technologies/tower_crane/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

A tower crane lifts steel, concrete, formwork and other heavy loads to any point of a building site, and keeps doing so as the building rises. Wolff built the first in 1910 ^[1]. Liebherr's low-priced, quick-erecting crane followed in 1949 ^[1], and climbing cranes from 1956 ^[1] made modern high-rise building possible.

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

A steel lattice mast stands on a heavy concrete base or on rails. At its top a slewing ring, a large turning bearing, carries a horizontal arm called the jib. On a hammerhead or flat-top crane, a trolley runs along the jib with the hook hanging below it, so the load can move in and out as well as round ^[2]. A shorter counter-jib behind the mast carries concrete counterweights. They balance the turning effect of the load, its weight times its distance from the mast, so the crane does not tip. A luffing crane instead raises and lowers its jib to change reach, useful on cramped sites. Climbing cranes add mast sections or jack themselves up inside the building as it grows ^[1].

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Capacity of early tower cranes | 1 | tonne or less | – | ^[2] |
| Capacity of Liebherr's first mobile tower crane | 1000 | kg | 1949 | ^[1] |
| Jib length of that crane | 16 | m | 1949 | ^[1] |
| Capacity of Zoomlion's largest flat-top crane | 450 | t | 2021 | ^[2] |
| Maximum hook height of that crane | 400 | m | 2021 | ^[2] |

as of 2026-11-11. Cranes Today gives the early capacity for small tower cranes of the late 19th and early 20th centuries, with reaches of 5 to 16 m [2].

#### Where it is used

The main places and products the technology is found in

- High-rise office and residential towers
- Housing and commercial building sites
- Bridges, dams and power stations
- Shipyards and precast concrete yards

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Note**
: No opened source counts tower cranes in use or made each year. Most makers offer climbing cranes ^[1], and the largest models of 2021 and after are rated at 12,000 to 15,000 tonne-metres ^[2].

as of 2026-11-11

#### Sources

1. [Cranes Enabled Faster, Safer Construction of Tall Buildings (20 August 2008)](https://www.enr.com/articles/29387-cranes-enabled-faster-safer-construction-of-tall-buildings) ENR (Engineering News-Record), 2008
2. [Origin of the species (Amit Thadani)](https://www.cranestodaymagazine.com/analysis/origin-of-the-species-10346255/) Cranes Today, 2022

## Other sections

- [Summary](https://www.materialinsights.org/technologies/tower_crane/index.md)
- [Science](https://www.materialinsights.org/technologies/tower_crane/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/tower_crane/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/tower_crane/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/tower_crane/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/tower_crane/tech-industries/index.md)
