# Medical ultrasound: Science

Source page: https://www.materialinsights.org/technologies/ultrasound_imaging/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Piezoelectricity](https://www.materialinsights.org/science/piezoelectricity/) Crystals that change shape under voltage, an effect described in 1880 ^[3], both send the sound pulses and pick up the echoes.
- [Sound waves](https://www.materialinsights.org/science/acoustics_sound_waves/) Sound reflects at boundaries between tissues, and its known speed in tissue, about 1,540 m/s, turns echo time into depth ^[4].
- [Doppler effect](https://www.materialinsights.org/science/doppler_effect/) Echoes from moving blood shift in pitch, which Doppler ultrasound uses to measure flow; it was reported from Osaka as early as the mid-1960s ^[3].

as of 2026-11-10

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1880 | Pierre Curie | Described the piezoelectric effect, by which some crystals turn pressure into voltage and back ^[3] |
| 1915 | Paul Langevin | Built the first hydrophone using ultrasonic waves to locate submarines ^[3] |

as of 2026-11-10

#### Physical limits

The limits nature sets, today's best and how far there is still to go

| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Wavelength limit on detail: finer detail needs shorter waves, which are absorbed sooner | 0.08 | mm | About 0.08 mm wavelength at 20 MHz (calculated from 1,540 m/s) | High frequencies give fine detail only near the surface; deep organs need lower frequencies and coarser detail ^[4] |
| Safe heating of tissue (thermal index) | 1 | index | Scans are kept below a thermal index of 1.0 | Sets how much sound power can be used in a scan ^[4] |

as of 2026-11-10. The wavelength is calculated by the writer from the speed of sound and the top frequency in source 4.

#### The science explained

The science behind it explained for a curious reader

Think of shouting into a canyon and timing the echo to judge how far away the wall is. Ultrasound does the same thing millions of times faster. Sound at 1 to 20 MHz, far above human hearing, travels through the body at about 1,540 metres per second ^[4]. Each time it reaches a boundary between tissues of different stiffness, some bounces back. Measuring how long each echo takes gives its depth; measuring how strong it is gives its brightness. The sound is made and heard by piezoelectric crystals, which vibrate when a voltage is applied and make a voltage when echoes push on them ^[3]. Short waves show more detail but fade faster, so a deep scan trades sharpness for reach ^[4].

as of 2026-11-10

#### Sources

1. [A Short History of Sonography in Obstetrics and Gynaecology](https://pmc.ncbi.nlm.nih.gov/articles/PMC3987368) Facts, Views and Vision in ObGyn, on PubMed Central, 2013
2. [Physical Principles of Ultrasound, including Safety (Basic Training)](https://isuog.org/asset/132026A0%2D35F6%2D4A53%2DBA76E390CCAA8E92) International Society of Ultrasound in Obstetrics and Gynecology (ISUOG)

## Other sections

- [Summary](https://www.materialinsights.org/technologies/ultrasound_imaging/index.md)
- [Overview](https://www.materialinsights.org/technologies/ultrasound_imaging/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/ultrasound_imaging/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/ultrasound_imaging/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/ultrasound_imaging/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/ultrasound_imaging/tech-industries/index.md)
