# X-ray imaging: Energy footprint

Source page: https://www.materialinsights.org/technologies/x_ray_imaging/tech-energy-footprint/

#### Energy in use

The energy it uses or converts while it works, and how efficiently

**Consumption**
: Electricity: a high voltage drives the tube for a fraction of a second per plain image

**Conversion**
: Electrical energy of fast electrons into X-rays and heat in the target

**Efficiency**
: Low: only a small part of the electron energy becomes X-rays, the rest heats the target

**Note**
: Tungsten targets, standard since the Coolidge tube ^[5], survive the heat.

as of 2026-11-10

#### Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back
 Consumes

- [El Electricity](https://www.materialinsights.org/energy/electricity/) The tube, generator and digital detectors run on mains electricity.
 Loses

- [Ht Heat](https://www.materialinsights.org/energy/heat/) Most of the energy of the electrons ends up as heat in the target, which must be cooled.

as of 2026-11-10

#### Sources

1. [William D. Coolidge](https://edisontechcenter.org/coolidge.html) Edison Tech Center

## Other sections

- [Summary](https://www.materialinsights.org/technologies/x_ray_imaging/index.md)
- [Overview](https://www.materialinsights.org/technologies/x_ray_imaging/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/x_ray_imaging/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/x_ray_imaging/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/x_ray_imaging/tech-materials/index.md)
- [Industries](https://www.materialinsights.org/technologies/x_ray_imaging/tech-industries/index.md)
