Material Insights · Understanding the Material World

Design, failure and safety: how engineering knowledge grows

Why failure teaches engineers more than success, what a factor of safety really buys, and how design cycles, tests, simulation and codes turn failures such as the Comet, Hyatt Regency, Challenger and Morbi into knowledge. Includes risk targets, redundancy and the common-cause trap, and the arithmetic of reliability numbers.

All courses / Understanding Engineering / Module 12

Design, failure and safety: how engineering knowledge grows

Why failure teaches engineers more than success, what a factor of safety really buys, and how design cycles, tests, simulation and codes turn failures such as the Comet, Hyatt Regency, Challenger and Morbi into knowledge. Includes risk targets, redundancy and the common-cause trap, and the arithmetic of reliability numbers.

5 parts · 17 sections · about 50 minutes · 0 of 5 parts read

By the end you will be able to

  • Explain why a long record of success says little about the margin left in a design, using return periods.
  • Describe four famous failures from public inquiries and name the lesson each taught.
  • Estimate the chance of failure for a given factor of safety and spread in loads, and say what a factor cannot cover.
  • Set an inspection interval from a crack growth rate, and explain fail-safe design with examples.
  • Follow the design cycle, a test ladder and a simulation sanity check, and say how codes such as BIS and the Eurocodes store lessons.
  • Work with risk targets, common-cause failure and failure rates in FIT and MTBF.

Contents

  1. Part 1 Why failure teaches more than success

    Engineers do not learn the limits of a design from the designs that stand. They learn them from what falls, cracks or leaks, and from tests that push things until they do. This part shows why a long record of success says little about the margin left, where failures come from, and how the swing between daring and caution makes knowledge grow.

    • A standing structure is a prediction not yet contradicted, and a failure marks the limit exactly
    • Failures trace to a few families of cause, and a missing theory is only one of them
    • Success breeds daring, daring meets its limit, and knowledge grows in the swing between them
  2. Part 2 Four failures and what each one taught

    Four public cases follow, told from official inquiries and reliable reports. Each shows a different link in the chain: what was not known, what was changed without checking, what the data said and was not heard, and what was not tested. The numbers come from the investigation records and the arithmetic is ours. Questions of legal blame belong to the courts; the aim here is the engineering lesson.

    • The Comet airliners: nobody knew how fast a pressurised skin would tire
    • The Hyatt Regency walkways: a small change in a connection doubled the load on its weakest detail
    • Challenger: the data had been seen, and the decision was reached with the burden of proof the wrong way round
    • Morbi, 2022: the knowledge to check the bridge was old, and the gate that would have required it was missing
  3. Part 3 What a factor of safety really buys

    The module Structures and materials defined the factor of safety and listed typical values. This part asks what that margin buys in terms of risk, what it cannot buy, and how aircraft designers live with a small factor by letting parts crack safely and finding the cracks in time.

    • A factor of safety buys a small chance of failure, and the spread in loads matters as much as the factor
    • A factor cannot cover a changed structure, a missing check or a margin eaten away
    • Fail-safe design assumes parts will crack and arranges that a crack is found before it matters
  4. Part 4 The design cycle, testing and how knowledge is stored

    Design goes round a loop of defining, imagining, choosing, building and testing, and each lap leaves something behind: a better part, a measured number or a new rule. This part follows the loop, the tests that feed it, the simulations that save tests, and the codes where the lessons end up.

    • The design cycle is drawn as a line and used as a loop, and errors cost more at every later step
    • Tests form a ladder from coupons to full scale, and the most informative test is the one that breaks the thing
    • Simulation tries thousands of variants cheaply, but only tests make it trustworthy
    • Codes and standards store what failures and tests have taught, which is why they change after disasters
  5. Part 5 Risk, redundancy and reliability numbers

    Safety is finally a matter of numbers: how likely, how bad, and how many independent defences stand between a fault and a disaster. This part sets out how risk is defined, why spare parts protect less than they appear to, and how failure rates are quoted and misread.

    • Risk is the chance of a harm times its size, and each field states its target in its own units
    • Redundancy protects only against independent failures, and common causes usually dominate
    • Reliability numbers: failure rate, MTBF and the bathtub curve
  6. Wrap-up Key terms, try it in the table, final quiz, sources
Start: Part 1, Why failure teaches more than success →