Material Insights · Understanding the Material World

Catalytic converter: Evolution

Timeline

The milestones of the product, each with a source

YearEvent
1950In the early 1950s Eugene Houdry turns to the toxic exhaust of cars in Los Angeles, and builds catalytic systems for indoor forklifts [20].
1974Converters are first fitted to US cars, the 1975 model-year vehicles sold from the autumn of 1974, as EPA rules require them on all cars from model year 1975; Japan follows in 1975 [29][20][3].
2001Before 2001 makers replaced platinum with palladium at nearly 2 to 1; after the price spike the swap was cut to 1 to 1 [21].
2005Euro 4 cuts the sulphur limit in diesel fuel to a seventh, letting some palladium into diesel catalysts [21].
2015Palladium autocatalyst demand passes 10 million ounces [21].
2017The US Tier 3 standards begin to phase in, reaching full effect in model year 2025 [18].
2020Bharat Stage VI applies from 1 April in India and China 6a from 1 July [16][19].
2023China 6b is scheduled to apply from 1 July [19].
2026Euro 7 applies to new car types from 29 November [17].

as of 2026-11-15

Recipe changes

How what it is made of changed over time, and what drove each change

ChangeFromToDriverSource
From two-way to three-way catalystsPlatinum with rhodium controlling carbon monoxide and unburnt hydrocarbonsSimultaneous oxidation of those and reduction of nitrogen oxides in a single unitLimits on nitrogen oxides (the source gives no year)[21]
Palladium in place of platinum in petrol convertersPlatinum-ledPalladium-led: substitution at nearly 2 to 1 before 2001, later 1 to 1 as the price spikedPalladium was cheaper than platinum[21][9]
Palladium enters diesel catalystsPlatinum onlySome palladium after the 2005 sulphur cutEuro 4 cut fuel sulphur to a seventh[21]
Less rhodiumRhodium at over USD 10,000 an ounce in 2008Industry cut rhodium use as far as possible until the next round of emission rulesPrice[6]
PGM per US petrol car, medium case (2016 projection)5.12 g (2011)6.75 g (2020) and 6.21 g (2025), both projectedTier 3 standards and smaller engines, as assumed in the projection[2]
PGM per US diesel car, medium case (2016 projection)10.1 g (2011)9.25 g (2020) and 8.51 g (2025), both projectedTier 3 standards and smaller engines, as assumed in the projection[2]

as of 2026-11-15

What could improve it next

Directions for improvement, today's value and the limit

DirectionMetricTodayLimitUnitSource
Use less metal per carPGM per US petrol car, medium case (2016 projection)6.21 (projected for 2025)Not found in sourcesg[2]
Lower light-off temperature through better placement of the metalsLight-off temperature of a test catalystAbout 70 C lower with PGM on ceria-zirconia than on aluminaNot found in sourcesC[23]
Last longer under tougher rulesDistance over which Euro 7 limits must hold160,000 km main, 200,000 km additionalNot found in sourceskm[17]
Recover more of the metal from scrapPGM recovered in refiningAround 95100%[6]

as of 2026-11-15

Sources

  1. Platinum Group Metals (PGM) for Light-Duty Vehicles, Program Record 16006 U.S. Department of Energy, 2016
  2. Autocatalysts and Platinum Group Metals (PGMs), fact sheet International Platinum Group Metals Association
  3. Rhodium factsheet International Platinum Group Metals Association, 2026
  4. Mineral Commodity Summaries 2026: Platinum-group metals USGS, 2026
  5. Bharat Stage VI: India leapfrogs today and it is no Fool's day Down To Earth (Anumita Roychowdhury), 2020
  6. Regulation (EU) 2024/1257 (Euro 7), consolidated text EUR-Lex, 2026
  7. EPA Tier 3 final rule update International Council on Clean Transportation, 2014
  8. Why China should not postpone implementation of the China 6 emission standard for new cars International Council on Clean Transportation, 2020
  9. Clean Machine Science History Institute, 2015
  10. The autocatalyst: a potted history SFA (Oxford), 2024
  11. Enhanced NO, CO and C3H6 Conversion on Pt/Pd Catalysts: Impact of Oxygen Storage Material and Catalyst Architecture Zhou, Harold and Luss, University of Houston (OSTI), 2020
  12. Early Automotive Exhaust Catalysts North American Catalysis Society (George Lester), 2012