Industrial robot: Working
What it is
The product and the job it does, in a short paragraph
An industrial robot is a reprogrammable arm with three or more axes, run by a controller, that moves tools or parts through programmed motions in factories [18]. It welds, paints, assembles, packs and loads machines. This node covers the arm and its controller, under the trade heading for industrial robots not elsewhere specified. Grippers, welding torches, cell guarding, mobile robots and humanoids are left out. The functional unit is one robot.
as of 2026-11-13
How it works
How it does its job, step by step in plain words
The arm is a chain of rigid links joined at rotary joints. An electric motor turns each joint, and a gearbox trades speed for torque. A sensor on each joint reports its angle. A programmer teaches the arm positions or writes them in software. The controller works out how far each joint must turn to bring the tool to each point, then compares measured angles with targets many times a second and corrects the motors. A gripper, welding torch or spray gun on the end does the work. Heavy loads need more torque, so reach, payload and weight trade against one another: the IRB 6700 reaches 2.65 m with 235 kg but 3.20 m with 150 kg [6]. A new task needs a new program, not a new machine.
as of 2026-11-13
Key specifications
The numbers that describe it, each with unit, variant, year and source
| Spec | Value | Unit | Year | Source |
|---|---|---|---|---|
| Payload of one small collaborative arm (UR5e) | 5 | kg | 2026 | [7] |
| Reach of the UR5e | 850 | mm | 2026 | [7] |
| Weight of the UR5e, including cable | 20.7 | kg | 2026 | [7] |
| Pose repeatability of the UR5e (ISO 9283) | 0.03 | mm | 2026 | [7] |
| Maximum power consumption of the UR5e | 570 | W | 2026 | [7] |
| Highest payload in the IRB 6700 range (IRB 6700-235) | 235 | kg | 2013 | [6] |
| Weight of an IRB 6700 arm (1,250 to 1,280 kg across the range; lower figure shown) | 1250 | kg | 2013 | [6] |
| Power consumption of the IRB 6700 at the ISO cube test | 2.85 | kW | 2013 | [6] |
| Working life of a robot, as given by one maker | 8 | years | 2023 | [8] |
as of 2026-11-13
Limits
The physical limits set by science and the engineering limits of today's design, with today's value
| Limit | Kind | Today | Unit | Source |
|---|---|---|---|---|
| Payload carried per kilogram of arm: the UR5e lifts 5 kg with a 20.7 kg arm (the IRB 6700-235 lifts 235 kg with a 1,250 to 1,280 kg arm) | Engineering | 0.24 | kg of payload per kg of arm (UR5e, calculated) | [6][7] |
| Reach falls as payload rises within one arm family, because the torque at the base grows with load times distance (IRB 6700: 2.65 m at 235 kg, 3.20 m at 150 kg) | Physical | 2.65 | m of reach at 235 kg payload | [6] |
| Constant power draw while running (100 W for one small collaborative arm, a UR5, in a 2021 study), about half of its 6,913 kWh over 36,000 h (calculated: 100 W times 36,000 h is 3,600 kWh) | Engineering | 100 | W | [4] |
as of 2026-11-13
Science it relies on
The science principles it works by or is limited by
Relies on- Feedback control theory Each joint measures its angle and the controller corrects its motor until the tool follows the planned path.
- Newton's laws of motion Moving a heavy arm and load takes force and torque, which limits speed, reach and payload.
as of 2026-11-13
Sources
- Impact of Cycle Time and Payload of an Industrial Robot on Resource Efficiency (Stuhlenmiller, Weyand, Jungblut, Schebek, Clever and Rinderknecht, Robotics 10(1), 33) MDPI, 2021
- The next generation of large industrial robots: IRB 6700 data sheet (ROB0252EN_A) ABB, 2013
- UR5e datasheet Universal Robots, product manuals
- Sustainability in industrial robots Yaskawa Europe, 2023
- World Robotics 2025, Industrial Robots: Sources and methods International Federation of Robotics, 2025