Material Insights · Understanding the Material World

Lead-acid battery: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

Masses are from the 2017 European life-cycle study by Sphera for EUROBAT: a Standard 12 V, 70 Ah battery of 18 kg made with 10.5 kg of lead, 4.35 kg of acid and about 1.3 kg of plastic, the rest being water and small parts; the table gives factory inputs per battery [1]. Plates, separators, terminals and cases are not yet nodes; a survey of recovered batteries finds about 60% lead, 7% plastic and 30% acid [3].

as of 2026-11-13

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant 1 Standard
MaterialRoleAmount in one unitShare of the unit's massRecycled content
Pb LeadFunctional10.5 kg58.3%75%
Lead including alloys, red lead and oxide, 10.5 of 18 kg (mass share calculated) [1]. 75% of the lead is secondary [1].
H2SO4 Sulphuric acidFunctional4.35 kg24.2%–
Sulphuric acid counted as 100% acid, 4.35 of 18 kg (calculated) [1]; the rest of the electrolyte is water.
PP PolypropyleneStructural0.76 kg4.2%–
Polypropylene, 0.76 of 18 kg (calculated); a further 0.18 kg of secondary polypropylene is listed separately [1].
LLDPE Polyethylene (LDPE, LLDPE)Structural0.38 kg2.1%–
Polyethylene, 0.38 of 18 kg (calculated) [1].
Variant 2 Improved
MaterialRoleAmount in one unitShare of the unit's massRecycled content
Pb LeadFunctional10.23 kg53.8%75%
10.23 of 19 kg (calculated) [1]; 75% secondary [1].
H2SO4 Sulphuric acidFunctional3.23 kg17%–
3.23 of 19 kg (calculated) [1].
PP PolypropyleneStructural0.59 kg3.1%–
0.59 of 19 kg (calculated); a further 0.15 kg of secondary polypropylene is listed separately [1].
LLDPE Polyethylene (LDPE, LLDPE)Structural0.19 kg1%–
0.19 of 19 kg (calculated) [1].
Variant 3 Advanced
MaterialRoleAmount in one unitShare of the unit's massRecycled content
Pb LeadFunctional11.65 kg58.3%75%
11.65 of 20 kg (calculated) [1]; 75% secondary [1].
H2SO4 Sulphuric acidFunctional3.7 kg18.5%–
3.70 of 20 kg (calculated) [1].
PP PolypropyleneStructural0.77 kg3.9%–
0.77 of 20 kg (calculated); a further 0.12 kg of secondary polypropylene is listed separately [1].
LLDPE Polyethylene (LDPE, LLDPE)Structural0.25 kg1.3%–
0.25 of 20 kg (calculated) [1].

as of 2026-11-13

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensSource
Make lead alloy and oxideLead is alloyed with a small share of other metals for the grids, and part of it is turned into lead oxide.[4]
Cast grids and apply pasteGrids are cast and filled with a paste of lead oxide, sulphuric acid and water to make positive and negative plates.[4]
Assemble cellsPlates are stacked with separators into cells and joined in series to give 12 V.–
Fit the case and fillThe cells go into a polypropylene case, which is closed and filled with sulphuric acid.[1]
Charge and testThe battery is charged for the first time and tested before it ships.–

as of 2026-11-13

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies
  • PbA Lead-acid batteries 0.84 kWh Standard Nominal energy of 12 V times 70 Ah (calculated) [1]; the same 12 V and 70 Ah apply to the Improved and Advanced designs.

as of 2026-11-13

Sources

  1. Life Cycle Assessment of Automotive Lead Batteries (report version V6.0, 12 May 2022; results represent 2017) Sphera Solutions for the Association of European Automotive and Industrial Battery Manufacturers (EUROBAT), on the International Lead Association site, 2022
  2. An Analysis of EU Collection and Recycling of Lead-based Automotive Batteries During the Period 2015-2017 IHS Markit for ACEA, JAMA, KAMA, EUROBAT and ILA (on the EUROBAT site), 2020
  3. About the Lead Acid Battery Battery Council International