Material Insights · Understanding the Material World

LED lamp: Working

What it is

The product and the job it does, in a short paragraph

An LED lamp makes light from a semiconductor chip and fits an ordinary bulb socket. This node covers complete retrofit lamps under HS 8539.52. The functional unit is one A60 bulb replacement of 8 W, the Philips CorePro size, which gives 806 lm and replaces a 60 W incandescent bulb [3]. The sources opened also cover lamps of 5.2 W and 5.9 W [1][2]. Linear lamps, spotlights, filament lamps and whole luminaires are left out.

as of 2026-11-13

How it works

How it does its job, step by step in plain words

Current passes through a small semiconductor chip, where electrons and holes meet and give up their energy as blue light. A phosphor coating turns part of the blue into yellow and red, so the mix looks white; the twin technology page explains the physics. A driver in the lamp turns mains current into the low direct current the chip needs, and it weighed 43.7 g to 50.1 g in the three US lamps that were taken apart [7]. The chip and driver still make heat, which has to leave through a metal body: in an older, heavy Ledvance lamp aluminium was 71 g of its 175.11 g [4]. The lamp is then fitted with a screw cap and a diffuser of glass or plastic.

as of 2026-11-13

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitYearSource
Power, Philips CorePro A608W– [3]
Light output, Philips CorePro A60806lm– [3]
Efficacy, Philips CorePro A60100lm/W– [3]
Rated lifetime, Philips CorePro A6015,000hours– [3]
Mass, Philips CorePro A6023g– [3]
Power and light output, Signify MASTER UltraEfficient A60 (declared 2024)5.2W for 1095 lm (210.6 lm/W)2024[1]
Reference service life, Signify MASTER UltraEfficient A6050,000hours2024[1]
Power and light output, Signify MASTER Value Glass A60 (declared 2024)5.9W for 806 lm2024[2]
Mass of the lamps in the two Signify declarations37g (5.2 W lamp; 31 g for the 5.9 W lamp)2024[1][2]
Mass, Ledvance Parathom Classic A (an older, heavy design; the undated page prints 8 W, 345 lm and 25,000 h)175.11g– [4]

as of 2026-11-13

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Highest efficacy an ideal white light source can reach (low end of the 250 to 370 lm/W range, set by the eye's response)Physical250230lm/W (today is the best available LED product)[25][8]
Average efficacy of LEDs sold today against the best available productsEngineering230100lm/W[8]
Rated lifetime of the CorePro lamp against the reference service life of the Signify 5.2 W lampEngineering50,00015,000hours[3][1]

as of 2026-11-13

Science it relies on

The science principles it works by or is limited by

Relies on
  • Electroluminescence Current makes the semiconductor give off light directly, with no hot filament.
  • The p-n junction Electrons and holes meet at the junction between two kinds of semiconductor and release photons.
  • Band theory of solids The band gap of the chip sets the colour of its light; the phosphor then widens it to white.
Limited by
  • Blackbody radiation White light is judged against a blackbody spectrum: an ideal source that emits a truncated blackbody spectrum only where the eye sees reaches 250 to 370 lm/W, which caps LED lamp efficacy [25].

as of 2026-11-13

Sources

  1. Environmental Product Declaration: MAS LEDBulbND5.2-75W E27 827 A60 FR G UE (pre-verified, EN 15804+A2) Signify N.V., EPD Hub (pre-verified EPD, published 13 February 2024), 2024, Tables A2 and impact table
  2. Environmental Product Declaration: MASTER Value Glass LED bulbs A60 Signify N.V., EPD Hub (published 26 August 2024), 2024, Table A2 and impact table
  3. Philips CorePro, LEDbulb, A60, 60 W, E27, 4000 K, 806 lm, CRI 80, 15000 h, Plastic Signify (product page)
  4. Life cycle analysis of a LEDVANCE light-emitting diode lamp LEDVANCE GmbH, Material table (PARATHOM CLASSIC A, 8 W, 345 lm, 25,000 h as printed; page undated)
  5. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing (PNNL-22346) Pacific Northwest National Laboratory for the U.S. DOE Solid-State Lighting Program (March 2013), 2013, Tables B-15 to B-18; section 5
  6. The next wave of LED lighting: smarter, circular and more efficient (commentary) International Energy Agency, 2026
  7. Maximum Spectral Luminous Efficacy of White Light (arXiv:1309.7039, Thomas W. Murphy Jr.) arXiv preprint, 2013