Material Insights · Understanding the Material World

Optical fibre cable: Working

What it is

The product and the job it does, in a short paragraph

An optical fibre cable packs glass fibres inside a protective sheath so that light pulses can carry data over long distances. This node covers finished cables under HS 8544.70. The functional unit is one km of cable. Bare fibre, connectors, and the electrical cables covered by the insulated power cable node are left out. The references are a 115.9 kg per km telecom duct cable [1] and a 690.5 kg per km optical ground wire for overhead power lines [2].

as of 2026-11-13

How it works

How it does its job, step by step in plain words

Each fibre is a thin strand of fused silica with a plastic coating [4, 3]. Light entered at one end stays inside the glass core by total internal reflection and reaches the far end. The cable's job is to protect the fibres and keep them from stretching. In a duct cable, fibres sit in micromodules inside a black polyethylene sheath with fibreglass reinforcement [1]. In an optical ground wire, the fibres sit in a plastic loose tube inside an aluminium tube, wrapped in aluminium-coated steel wires, so the same line earths the power line and carries data [2]. Water-blocking yarns, tapes or a water lock keep moisture away from the glass [1, 2].

as of 2026-11-13

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Mass of the duct cable (code EE85RG10001440GN), declared unit 1 km115.9kg per kmDuct2022[1]
Expected life span of the duct cable25yearsDuct2022[1]
Mass of the optical ground wire (OPGW SM 16.7, 48 fibres), total of its composition table690.531kg per kmOPGW2022[2]
Reference service life of the optical ground wire40yearsOPGW2022[2]
Number of fibres in the optical ground wire48fibresOPGW2022[2]
Mass of the 'optical transmission' part (the fibres) of the optical ground wire, 0.52% of the cable3.621kg per kmOPGW2022[2]

as of 2026-11-13

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
DuctTelecom micromodule cable for installation in ducts, black polyethylene sheath with fibreglass reinforcement, 115.9 kg per km2022[1]
OPGWOptical ground wire for overhead power lines, 48 fibres, aluminium tube and aluminium-coated steel wires, about 690.5 kg per km2022[2]

as of 2026-11-13

Science it relies on

The science principles it works by or is limited by

Relies on

as of 2026-11-13

Sources

  1. Environmental Product Declaration: Optical fibre cables for telecommunication networks through duct installation (S-P-05723) Cables de Comunicaciones Zaragoza S.L. (Cablescom), The International EPD System (EPD International AB), 2022
  2. Environmental Product Declaration: Optical Ground Wire OPGW SM 16.7 48FO (EPDITALY0334) Prysmian Cabos e Sistemas do Brasil S.A., EPDItaly, 2022
  3. Optical Glass Fibre Information Sheet (2025-11-20) Prysmian, 2025
  4. Carbon Footprint Estimation in Fiber Optics Industry: A Case Study of OFS Fitel, LLC (Inakollu, Morin and Keefe), Sustainability 9(5), 865 MDPI, 2017