Material Insights · Understanding the Material World

Passenger car tyre: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

Amounts are for one 195/65R15 general-purpose tyre of 8.6 kg in a 2021 Japanese industry guideline, calculated from its recipe of 206 parts by weight (new rubber = 100) [1]. Its 7 parts of inorganic agents are zinc oxide, sulphur and silica (1 part, about 0.04 kg, no node). Assumptions: textile as polyester, synthetic rubber as styrene-butadiene. A low-fuel-consumption tyre uses more silica (16.9 parts); larger tyres weigh more, up to 15.95 kg for a 285/45R21 [3].

as of 2026-11-13

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant General-purpose
MaterialRoleAmount in one unitShare of the unit's mass
SBR Styrene-butadiene rubberStructural2.55 kg29.6%
All synthetic rubber, 61 parts of 206; the guideline does not split styrene-butadiene from polybutadiene, so it is linked to styrene-butadiene rubber [1]
CB Carbon blackFunctional2.09 kg24.3%
Reinforcing filler that gives wear resistance and the black colour [1]
Rbr Natural rubberStructural1.63 kg18.9%
Natural rubber, 39 parts of 206 in the guideline recipe (calculated as 39 / 206 x 8.6 kg) [1]
St SteelStructural0.96 kg11.2%
Steel cord for the belts (15 parts) and bead wire (8 parts), calculated from the guideline recipe [1]
PSF Polyester fibreStructural0.42 kg4.9%
Textile cord of the casing plies, 10 parts of 206; the guideline does not name the fibre, so polyester is an assumption [1]
Oil Crude oilFunctional0.33 kg3.9%
Process oil, 8 parts of 206, a petroleum product that softens the compound; linked to crude oil as the nearest node [1]
RC Rubber chemicalsFunctional0.33 kg3.9%
Organic rubber chemicals such as accelerators and antioxidants [1]
S SulfurFunctional0.13 kg1.5%
Sulphur that cross-links the rubber in curing, 3 parts of 206 [1]
Zn ZincFunctional0.1 kg1.2%
Zinc in the zinc oxide (zinc white) activator for curing: 3 parts of 206 give 0.125 kg of zinc oxide, of which about 80% by mass is zinc (calculated) [1]

as of 2026-11-13

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensTechnologySource
MixingBales of natural and synthetic rubber are cut, weighed and mixed with carbon black, oil and chemicals to a recipe [29]– [29]
Component preparationAn extruder shapes the tread into an endless strip; steel cord is embedded in layers of rubber on a calender [29]– [29]
BuildingThe tyre is built in two stages, the casing and the tread and belt assembly, into a green tyre [29]– [29]
CuringThe green tyre is vulcanised for a set time at a set pressure and temperature, turning raw rubber into elastic rubber [29]Vulcanisation of rubber[29]

as of 2026-11-13

Technologies used to make it

The technologies used to make it, at which step

Made with
  • Vul Vulcanisation of rubber Curing the green tyre in a heated mould Every tyre is cured; the source gives no share figure [29]
  • SR Synthetic rubber Making the synthetic rubber blended into the compound About 30% of the tyre is synthetic rubber by mass in the guideline recipe (calculated) [1]

as of 2026-11-13

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies
  • Tyr Pneumatic tyre The air-filled tyre is the technology; a passenger car carries four on the road.

as of 2026-11-13

Sources

  1. タイヤのLCCO2算定ガイドライン Ver. 3.0.1 (Tyre LCCO2 calculation guideline, version 3.0.1) Japan Automobile Tyre Manufacturers Association (JATMA), 2021, Tables 3, 4, 10, 22 and the life-cycle results by stage (195/65R15 PC general-purpose and low-fuel-consumption tyres)
  2. Environmental Product Declaration: N'fera Sport AS 285/45R21 (S-P-08071) Nexen Tire, published by EPD International AB (The International EPD System), 2023
  3. Tyre production Continental Tyres, 2026