Material Insights · Understanding the Material World

Precast concrete products

Concrete parts cast in a factory: blocks, pipes, beams, slabs and wall panels.

Buildings and construction · No. 88

  • Steam and steel
Buildings and construction · Product

A cubic metre of precast concrete weighs about 2.4 tonnes, yet only about 16% of that is cement.

Chart: Illustration: Precast concrete products

Where it comes from

Chart: Map of where it comes from

Artificial stone blocks were made in a Minneapolis factory by 1885. Palmer's block machine of about 1900 spread block making, and in 1903 Liverpool's engineer Brodie built experimental precast houses.

Three things to know
  1. The US and Canada average structural precast element takes about 615 kg CO2e per m3 to make (calculated), while Swedish pipes take about 231 kg (calculated).
  2. Hollow-core slabs can use up to 45% less concrete than a cast-in-situ slab, a supplier claim.
  3. India recycles only about 1% of its construction and demolition waste, and new rules from 1 April 2026 set targets up to 100%.
The journey
  1. 1 Raw materialsCement, sand, crushed stone, water, admixtures and steel bar, mesh or strand
  2. 2 BatchingA plant weighs and mixes the concrete
  3. 3 CastingPoured into steel moulds or beds, with strand stretched first for prestressed parts
  4. 4 CuringHardens in about 5 to 20 hours
  5. 5 ErectionTrucked about 95 km on average in the UK and set by crane
  6. 6 End of lifeCrushed for aggregate, with the steel recycled

Try this in What if Switch on levers and see what changes in India by 2036.

Covered in Structures and materials: stress, stiffness, strength and why things breakEngineering
Go deeper pick a tab to open it in full