Lever and mechanical advantage: The idea
In plain words
The idea explained without jargon
A lever is a stiff bar that turns on a pivot, called the fulcrum. Push down a long way on one end and the other end moves a short way with a larger force [1]. The rule is a balance of turning effects: each force times its distance from the pivot must be the same on the two sides. So a small force far from the pivot can hold a large force close to it. Nothing comes free: the effort travels further in the same proportion as the force grows, so the work put in equals the work got out, less what friction turns into heat [2]. Pulleys, the wheel and axle and gears make the same trade of force for distance.
as of 2026-11-10
Key equation
The equation that sums it up, and what each symbol means
- Equation
- F1 × d1 = F2 × d2
- Symbols
- {"F1":"the effort, the force you apply, in newtons","d1":"the distance from the pivot to where the effort acts, in metres","F2":"the force on the load, in newtons","d2":"the distance from the pivot to the load, in metres"}
- Note
- The mechanical advantage is the ratio of output force to input force, F2 / F1, which for an ideal lever equals d1 / d2 [1]. Archimedes stated the rule for weights on a balance: they are in equilibrium at distances in inverse proportion to their weights [3].
as of 2026-11-10
An analogy
A picture from everyday life that makes the idea easier to hold
A seesaw is the everyday lever: a child sitting far from the middle can balance a heavier adult sitting close to it. The adult rises only a little while the child swoops down a long way. The picture stops being true for real machines, where the bar bends, the pivot rubs and some of the effort is lost as heat.
as of 2026-11-10
Sources
- Lever Wikipedia
- Simple machine Wikipedia
- Archimedes (Dictionary of Scientific Biography entry) MacTutor History of Mathematics, University of St Andrews