Passivation and corrosion resistance: The idea
In plain words
The idea explained without jargon
Most metals would rather be rust: iron, aluminium and chromium all react readily with oxygen and water. Yet many stay bright for years. The reason is that the first reaction builds a film of oxide on the surface that is tight and continuous, and this film blocks the metal from the air and water beyond. The metal is then passive. The film is only a few nanometres thick, far too thin to see [1], but without it the most reactive metals could not be used at all [1]. In stainless steel, chromium makes such a film form by itself and re-form when scratched [6]. If the film is broken faster than it can heal, corrosion starts again.
as of 2026-11-12
Key equation
The equation that sums it up, and what each symbol means
- Equation
- metal + oxygen or water -> a thin, tight oxide film, which then blocks further reaction
- Symbols
- {"metal":"a reactive metal such as iron, chromium, aluminium or titanium","oxide film":"a layer a few nanometres thick that cuts the metal off from its surroundings"}
- Note
- Passivation has no single law; it is written here in words. The film is too thin to see with the naked eye [1]; whether it forms and holds depends on the metal, the acidity of the liquid and the electrical potential of the surface.
as of 2026-11-12
An analogy
A picture from everyday life that makes the idea easier to hold
A passive film is like the skin on a pot of custard: once it forms, the liquid underneath is sealed off from the air. Break the skin and a new one soon forms. The picture stops being true because the metal's film is a solid oxide bound to the surface, and in salty water it can fail in tiny spots that grow into pits.
as of 2026-11-12
Sources
- Passivity: the key to our metals-based civilization Pure and Applied Chemistry, IUPAC, vol. 71, no. 6 (Digby D. Macdonald), 1999
- 100 Years Of Stainless Steel - Science Museum Blog Science Museum, 2013