Material Insights · Understanding the Material World

Quantum tunnelling: Technologies

Technologies

The technologies that rely on it, and how each one uses it

Relied on by 5
  • STM Scanning tunnelling microscope Electrons tunnel across the gap between tip and surface, and the current changes so strongly with distance that single atoms show up [4].
  • Fl Flash memory Electrons tunnel through a thin oxide to charge and empty the floating gate; the same tunnelling slowly wears the oxide, which limits how often a cell can be rewritten.
  • Qc Quantum computing Current tunnelling through a thin barrier in a Josephson junction gives superconducting qubits their separate energy levels, the effect honoured by the 2025 Nobel Prize [5].
  • Memory chip Flash writes and erases by pushing electrons through a thin insulator.
  • Solid-state drive Writing a cell pushes electrons through a thin insulator onto a charge store.
Limits 5
  • Tsr Transistor In the smallest transistors electrons leak through very thin insulators by tunnelling, which wastes power [7].
  • MOS MOSFET When the gate insulator is only a few atoms thick, electrons tunnel through it, which drove the move to thicker hafnium-based insulators [7].
  • ALD Atomic layer deposition Tunnelling leakage through very thin silicon dioxide made chip makers switch to thicker hafnium-based high-k insulators [7], layers that atomic layer deposition lays down.
  • Fl Flash memory The same tunnelling slowly leaks charge and wears the insulator with each write, which limits how long data last and how often a cell can be rewritten.
  • Solid-state drive The same crossing wears the insulator, so each cell survives only a limited number of writes.

as of 2026-11-12

Sources

  1. Press release: The Nobel Prize in Physics 1986 The Royal Swedish Academy of Sciences, NobelPrize.org, 1986
  2. 2025 Nobel Prize Resources American Institute of Physics, 2025
  3. Intel's Transistor Technology Breakthrough Represents Biggest Change to Computer Chips In 40 Years Intel Corporation (press release), 2007