Material Insights · Understanding the Material World

Sonar: Overview

What it does

The job the technology does for people, in a short paragraph

Active sonar finds things underwater by sending out a pulse of sound and listening for its echo. The time the echo takes gives the distance, and its direction gives the bearing [2]. It is used to chart the sea, find hazards to ships and wrecks, and map the seabed [2]. Echo ranging was first shown at sea in 1914 [1], a US Navy ship ran a line of echo soundings across the Atlantic in 1922 [8], and commercial echo depth sounders followed in 1924 [1].

as of 2026-11-10

How it works

The working principle in plain words, step by step

A transducer, a device that turns electrical signals into sound and back, sits in the water or in a ship's hull. Modern ones use crystals or ceramics that change shape when a voltage is applied, the piezoelectric effect [5]; after the Second World War most underwater transducers moved to the ceramic lead zirconate titanate, or PZT [9]. The transducer sends out a short pulse of sound. When the pulse meets an object or the seabed, part of it bounces back as an echo [2]. The same transducer, or a separate receiver, picks up the echo and turns it back into an electrical signal. Half the round-trip time multiplied by the speed of sound in water gives the distance [2]. A multibeam system uses an array of transducers aimed at different angles, so one ping measures many depths across a wide fan [3].

as of 2026-11-10

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Share of the world's seafloor mapped in detail27.3%2025[4]
Depth soundings per ping from a ship's multibeam sonar (up to)864soundings– [3]
Deepest water mapped by typical multibeam systems (10 to 7,000 m)7000m– [3]
Speed of sound in fresh water, Colladon and Sturm's measurement at 8 degrees C1435m/s1826[6]

as of 2026-11-10. The multibeam figures describe NOAA's survey systems [3]; the 1826 figure differs by only 3 m/s from today's accepted value [6].

Where it is used

The main places and products the technology is found in

  • Nautical charting and finding hazards to navigation [2]
  • Seafloor mapping by survey ships [3]
  • Searching for wrecks and other objects on the seabed [2]
  • Echo depth sounders on ships [1, 8]
  • Naval detection of submarines, its first military use [1]

as of 2026-11-10

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
No world count of sonar systems found
Users
Over 185 organisations contribute seabed data to Seabed 2030 [4]
Year
2025
Note
Counts contributors to one global mapping project, not instruments.

as of 2026-11-10

Sources

  1. Underwater Acoustics: A Brief Historical Overview Through World War II Thomas G. Muir and David L. Bradley, Acoustics Today 12(3), Acoustical Society of America, 2016
  2. What is sonar? National Ocean Service, National Oceanic and Atmospheric Administration (NOAA)
  3. Multibeam Sonar NOAA Ocean Exploration
  4. 27.3% of World's Ocean Floor Now Mapped in Seabed 2030 Project The Nippon Foundation, 2025
  5. March 1880: The Curie Brothers Discover Piezoelectricity APS News, American Physical Society (This Month in Physics History), 2014
  6. The First Studies of Underwater Acoustics: The 1800s Discovery of Sound in the Sea (DOSITS), University of Rhode Island, 2020
  7. History: Timeline: NOAA Office of Ocean Exploration and Research NOAA Ocean Exploration
  8. Second Century of Electroacoustics Acoustics Today, Acoustical Society of America