Material Insights · Understanding the Material World

Atmospheric water harvesting

Sorbents such as metal-organic frameworks pull drinking water out of dry air.

Building and shelter · Water and sanitation · No. 443

  • Emerging
  • Readiness 5 of 9
  • System
Building and shelter · Technology

The air holds about 13 thousand trillion litres of water; a sunlit sponge of porous crystals can pull some out even in a desert.

Chart: Illustration: Atmospheric water harvesting

Where it comes from

Chart: Map of where it comes from

Metal-organic frameworks were built from 1989 onwards. In 2017 Yaghi's Berkeley group and Evelyn Wang's MIT team showed a sunlight-powered MOF harvester working at 20% humidity.

Three things to know
  1. A 2017 study modelled that its MOF-801 harvester could give 2.8 litres of water per kilogram of MOF a day at 20% humidity, using less than one sun.
  2. Fridge-type water generators stop working below about 30 to 35% humidity, while sorbents can still capture vapour from drier air.
  3. Omar Yaghi, whose group harvested water from Arizona desert air with MOFs, shared the 2025 Nobel Prize in Chemistry.
The journey
  1. 1 SorbentA porous crystal or hygroscopic material is made and packed in a bed
  2. 2 CaptureAt night or in a cool phase, water vapour sticks inside its pores
  3. 3 ReleaseSunlight or other heat warms the bed and drives the vapour out
  4. 4 CondenseThe concentrated vapour cools and condenses into liquid water
  5. 5 TreatThe water is collected, mineralised and stored for drinking
Go deeper pick a tab to open it in full