Balance scale
Weights on an even beam measure mass for trade and science.
Sensing and measurement · Measurement · No. 295
- Ancient
- Readiness 9 of 9
- Component
A beam on a pivot with a pan at each end has weighed goods for about 4,500 years, and laboratory versions sensed a millionth of a gram.
Chart: Illustration: Balance scale
Where it comes from
Chart: Map of where it comes from
Egyptians weighed goods on beam balances by about 2500 BCE. A pan hung from each end of the beam, and weights, some cast in bronze in animal shapes, were set against the load.
Three things to know
- Egyptian balances of the Old Kingdom, about 2500 BCE, already used a plumb line to show when the beam hung level.
- From 1750 to 1950 the equal-arm balance was the main weighing tool of laboratories; from 1948 design moved towards single-pan balances.
- Since 20 May 2019 the kilogram has been defined by a constant of nature, measured with an electromagnetic descendant of the balance.
The journey
- 1 BeamA rigid bar balanced on a central pivot
- 2 PansA pan hangs from each end of the beam
- 3 WeightsKnown weights, once stone or copper, are added to one pan
- 4 LevelWhen the beam hangs level, the two loads match
- 5 ReadingThe load's mass is the sum of the weights used