Material Insights · Understanding the Material World

Bronze alloying: Materials

Materials it needs

The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is

Needs 4
  • Cu Copper criticality medium Copper is about 88% of a typical bronze [2]; mining is concentrated in Chile, the Democratic Republic of the Congo and Peru [5].
  • Sn Tin criticality high Tin is about 12% of a typical bronze [2]; China, Indonesia and Myanmar mined about half the world's tin in 2024 [4].
  • As Arsenic criticality low The earliest bronzes were copper-arsenic alloys [2]; tin replaced arsenic because the alloy was easier to control and tin is not toxic [2].
  • Al Aluminium criticality low Aluminium bronze, hard and wear-resistant, is used for bearings and machine tool ways [2].

as of 2026-11-10. Amounts are given as shares of the alloy in the notes, not per functional unit; criticality is the writer's judgement from supply concentration.

Critical materials

The materials whose supply could hold it back

  • Tin: China, Indonesia and Myanmar mined about 153,000 of 300,000 t in 2024 (calculated), so supply rests on a few countries [4].
  • Tin has always been the scarce part of bronze: in ancient Europe it came from a few sources such as Cornwall and was traded as far as Phoenicia [2].
  • Copper: three countries mined about half of the world's copper in 2024 [5].

as of 2026-11-10

Sources

  1. Wikipedia: Bronze
  2. Mineral Commodity Summaries 2025: Tin USGS, 2025
  3. Mineral Commodity Summaries 2025: Copper U.S. Geological Survey, 2025