Collaborative robots: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Feedback control theory A computer steers the cobot's wheels or joints in a loop [1], reacting to the forces the worker or an obstacle applies.
as of 2026-11-11
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1868 | James Clerk Maxwell | First mathematical analysis of a feedback governor [5] |
| 1927 | Harold Black | Found that negative feedback reduces distortion, a key idea for stable control [5] |
| 1934 | Harold Hazen | Summed up the theory of servomechanisms, the basis of position control [5] |
as of 2026-11-11
The science explained
The science behind it explained for a curious reader
Think of dancing with a partner who leads but listens. An ordinary factory robot is a partner with its eyes shut: it follows its steps at full force whatever is in the way, so it must work behind a fence. A cobot keeps its hands light. It moves under feedback control, constantly comparing where it is with where it should be [5], and it treats an unexpected push as information. The very first cobots went further: they had no drive motors, so all the force came from the worker and the robot only chose the direction [1]. Either way, the machine is built so that contact with a person is gentle by design.
as of 2026-11-11
Sources
- COBOT: A KINDER, GENTLER ROBOT Northwestern University press release, hosted on Michael Peshkin's laboratory pages, 1996
- A History of Automatic Control C. C. Bissell (chapter in a Springer handbook, ISBN 978-3-540-78830-0; Lund University course copy)