Contact process (sulphuric acid): Overview
What it does
The job the technology does for people, in a short paragraph
The contact process makes concentrated sulphuric acid by oxidising sulphur dioxide over a solid catalyst [5]. Peregrine Phillips patented it in 1831 [1], and the first commercial plants were making fuming acid by 1880 [2]. It has largely replaced the lead chamber process [5], and essentially all sulphuric acid is now made this way [2]. About 90% of the sulphur used in the United States goes in as sulphuric acid [6].
as of 2026-11-12
How it works
The working principle in plain words, step by step
Sulphur is burnt in air, or sulphur dioxide is taken from smelter gases [6]. The gas is cleaned and dried, because traces of some elements, such as arsenic, spoil the catalyst [1][2]. It then passes through a converter holding beds of porous pellets coated with vanadium pentoxide [5]. On the hot catalyst surface, sulphur dioxide combines with oxygen from the air to form sulphur trioxide, giving off heat. Sulphur trioxide dissolves in water too violently to handle, so it is absorbed in strong sulphuric acid instead, and water is added afterwards [1]. In double-absorption plants the gas is absorbed once, passed over more catalyst and absorbed again, which converts nearly all the sulphur dioxide [1][2].
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| World sulphur production, the acid's main raw material | 84 | million t | 2025 | [6] |
| Share of US sulphur consumption taken in the form of sulphuric acid | 90 | % | 2025 | [6] |
| Conversion of sulphur dioxide in double-absorption plants, more than | 99.7 | % | – | [2] |
| US acid plant locations with contact plants, out of 228 | 53 | locations | 1920 | [2] |
as of 2026-11-12. The 2025 figures are from the USGS 2026 summary; world production is an estimate and the 90% share is for the United States [6]. The 1920 count is the source's 'about 1920'. The 99.7% is the source's 'more than 99.7%' for today's double-absorption plants; the paper shows no date, so the year is left blank [2].
Where it is used
The main places and products the technology is found in
- Phosphate fertilisers: sulphur is needed to turn phosphate rock into fertiliser [6]
- Synthetic dyes, whose makers needed fuming acid from the 1870s [2]
- Metal smelters, which recover their sulphur dioxide as by-product acid [6]
- General chemical manufacture, as the commonest strong acid
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Made per year
- World sulphur production was about 84 million t in 2025, most of it bound for sulphuric acid [6]
- Unit
- t of sulphur
- Year
- 2025
- Note
- Counts the raw material, not the acid; no open source gives world acid output.
Indicative · as of 2026-11-12
Sources
- Wikipedia: Contact process
- The History of the Contact Sulfuric Acid Process Acid Engineering & Consulting, Inc. (Leonard J. Friedman and Samantha J. Friedman), via silo.tips
- Contact process Encyclopaedia Britannica
- Mineral Commodity Summaries 2026: Sulfur US Geological Survey, 2026