Analogue computer (differential analyser): Overview
What it does
The job the technology does for people, in a short paragraph
A differential analyser solves differential equations, the equations that describe how things change, such as the swing of a power network or the flight of a shell. It does so with turning shafts instead of numbers. Vannevar Bush completed the first at MIT in 1931 [5]. Copies were built in Britain and elsewhere, and they served physics, seismology and ballistics until digital computers took over around 1950 [1].
as of 2026-11-11
How it works
The working principle in plain words, step by step
Each quantity in an equation is the angle of a long rotating shaft, driven by electric motors through gears [1]. The key part is the integrator: a small wheel resting on a spinning disc [6]. The further the wheel sits from the disc's centre, the faster it turns, so its total turning adds up, or integrates, one quantity against another. A torque amplifier with counter-rotating drums boosts the wheel's weak output so it can drive further gears [6]. Operators link six integrators and several input and output tables by hand to match the equation [1]. Feeding a shaft's output back to an integrator's input makes the machine settle on the equation's solution, which a pen draws as a curve.
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Integrators on Bush's analyser | 6 | integrators | 1931 | [1] |
| Long rotating shafts the integrators could be connected to | 18 | shafts | 1931 | [1] |
| Highest order of differential equation solved | 6 | order | 1931 | [5] |
| Cost of Bush's analyser | 25,000 | USD | 1931 | [1] |
| Rockefeller Foundation grant for the larger analyser | 230,500 | USD | 1936 | [1][5] |
as of 2026-11-11. The museum page gives the machine's figures under its 1931 completion and the grant without a year; the grant year, 1936, is from the IEEE Computer Society biography [5].
Where it is used
The main places and products the technology is found in
- Modelling electric power transmission networks, its first purpose
- Physics and seismology problems in universities
- Ballistics: firing tables for artillery in the Second World War
- Radar antenna profiles in wartime research
- Teaching, with small models built from Meccano
as of 2026-11-11
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- None in working use; preserved machines and parts are in museums such as the Science Museum Group and the Smithsonian [2][3]
- Unit
- machines
- Note
- A historical technology: MIT moved to digital machines by 1950 and its Rockefeller analyser ran until 1954 [1].
as of 2026-11-11
Sources
- Bush's Analog Solution Computer History Museum (Revolution exhibition)
- Analog Computing Component - Integrator (Five-Inch Disc) Smithsonian National Museum of American History
- Meccano differential analyser, 1947 Science Museum Group Collection
- Computer Pioneers - Vannevar E. Bush IEEE Computer Society
- Vannevar Bush's Differential Analyzer Kent H. Lundberg, Massachusetts Institute of Technology