Material Insights · Understanding the Material World

Direct reduction of iron

Reformed natural gas strips oxygen from iron ore pellets without melting them.

Making materials · Metals · No. 402

  • Electronic age
  • Readiness 9 of 9
  • Process
Making materials · Technology

Iron ore turned to iron without ever melting: 151 million tonnes were made this way in 2025, led by India and Iran.

Chart: Illustration: Direct reduction of iron

Where it comes from

Chart: Map of where it comes from

Hylsa started the first industrial direct reduction plant at Monterrey, Mexico, on 5 December 1957, using batch reactors. Midrex started its continuous shaft plant at Portland, Oregon, in May 1969.

Three things to know
  1. The first industrial direct reduction plant started in Monterrey, Mexico, on 5 December 1957, and the first Midrex plant followed in Portland, Oregon, in 1969.
  2. In 2025 about 65.1% of DRI was made with natural gas and 34.9% with coal.
  3. Its supplier says an Energiron DRI plant with an electric furnace cuts carbon dioxide by 53% against the blast furnace route on natural gas, and by 86% on 100% hydrogen.
The journey
  1. 1 Iron orePellets or lumps of iron oxide
  2. 2 Reducing gasNatural gas is reformed into hydrogen and carbon monoxide
  3. 3 Shaft furnaceHot gas strips oxygen from the ore while it stays solid
  4. 4 DRIPorous solid iron, cooled or charged hot
  5. 5 SteelAn electric arc furnace melts it into steel
Covered in Matter at the atomic scale: bonds, reactions and process engineeringEngineering
Go deeper pick a tab to open it in full