Material Insights · Understanding the Material World

Dynamic random-access memory: Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Band theory of solids The quantum theory of semiconductors [7] explains how the silicon of each cell's transistor can be made to switch.
  • The p-n junction The source and drain of each cell's MOS transistor are p-n junctions [9].

as of 2026-11-10

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1931Alan Wilson, CambridgeApplies the quantum theory of solids to semiconductors [7]
1940Russell Ohl, Bell LabsFinds the p-n junction in silicon [9]
1959John Atalla and Dawon Kahng, Bell LabsMake the first working MOS transistor, the switch in every DRAM cell [8]

as of 2026-11-10

The science explained

The science behind it explained for a curious reader

Picture each bit as a tiny bucket that holds electric charge instead of water. A full bucket is a 1, an empty one a 0 [3]. A tap beside each bucket, the transistor, lets the bucket be filled, emptied or checked through a shared pipe. But the buckets leak: within a fraction of a second the charge seeps away. So the memory chip walks through every row of buckets, again and again, reading each one and topping it up before it fades [3]. This is the price of making the cell so simple. With only one tap and one bucket per bit [4], the cells can be packed far more tightly than in memory that holds its state without refreshing, so a single chip can hold a billion or more of them [4].

as of 2026-11-10

Sources

  1. Thanks for the Memories IEEE Spectrum (Sally Adee), 2009
  2. Robert Dennard Lemelson-MIT Program
  3. 1931: The Theory of Electronic Semi-Conductors is Published Computer History Museum, The Silicon Engine
  4. 1960: Metal Oxide Semiconductor (MOS) Transistor Demonstrated Computer History Museum, The Silicon Engine
  5. 1940: Discovery of the p-n Junction Computer History Museum, The Silicon Engine