Demand response and vehicle-to-grid: Evolution
Timeline
The milestones from first idea to today
| Year | Milestone |
|---|---|
| 1948 | A review describes ten years of progress in ripple control for switching off-peak loads [1] |
| 1968 | Detroit Edison replaces water heater time clocks with radio control [2] |
| 1985 | Surveys count 259 load control projects in the United States [2] |
| 1997 | Kempton and Letendre publish the first description of the key concepts of vehicle-to-grid [4] |
| 2012 | The University of Delaware forms a joint venture with NRG to commercialise vehicle-to-grid [5] |
| 2014 | Over 9 million US customers are enrolled in demand response, saving 12,700 MW at the peak [2] |
| 2024 | Demand response in US wholesale markets reaches 33,272 MW, about 6.5% of peak demand [8] |
as of 2026-11-12
Lineage
The technologies it came from and the ones that came from it
Builds on- Dist Distribution grids, mini-grids and interconnectors Ripple control sends its signals over the power network itself to switch loads [1].
- EH Electric heating Electric water heaters were the first controlled loads, switched by time clocks, ripple signals and later radio [2].
- EV Electric and hybrid vehicles Vehicle-to-grid lets parked electric cars feed power back within limits set by their drivers [4].
as of 2026-11-12
Sources
- Centralized ripple control on high-voltage networks Journal of the Institution of Electrical Engineers, Part II: Power Engineering 95(47), 470-480 (Ross and Smith), record at ISC, 1948
- Evolving practice of demand-side management Journal of Modern Power Systems and Clean Energy 5(1), 1-9 (Gellings), 2017
- Peer-reviewed V2G articles University of Delaware, V2G project
- Plugging renewables into global grid | UDaily University of Delaware, UDaily, 2016
- 2025 Assessment of Demand Response and Advanced Metering US Federal Energy Regulatory Commission, staff report, 2025