Ammonia, methanol and e-fuels: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs- H2 Hydrogen criticality medium Every e-fuel starts with hydrogen made by electrolysis of water [2][3].
- N2 Nitrogen gas criticality low Nitrogen for ammonia is taken from air by an air separation unit, which uses 2 to 3% of the process energy [2].
- CO2 Carbon dioxide criticality low E-methanol in Iceland is made from CO2 captured from the flue gas of a nearby geothermal power plant [3].
- NH3 Ammonia criticality low Ammonia is both the energy carrier and a fertiliser; fertilisers take 80% of today's production [2].
- MeOH Methanol criticality low Renewable methanol is made from hydrogen and captured CO2 [3][4].
as of 2026-11-12. No source opened gives materials per tonne of fuel. Criticality is a judgement: the inputs are air, water and CO2; hydrogen is marked medium because green hydrogen supply is still small and costly.
Critical materials
The materials whose supply could hold it back
- Green hydrogen and cheap clean power: first-of-a-kind e-kerosene needs about 40 MWh of electricity per tonne and may cost 6,000 to 8,000 EUR/t [6].
- Investment: no e-SAF project in Europe had reached a final investment decision by June 2026 [6].
as of 2026-11-12
Sources
- Ammonia: zero-carbon fertiliser, fuel and energy store (policy briefing) The Royal Society, 2020
- Process Advantages of Direct CO2 to Methanol Synthesis Frontiers in Chemistry, vol. 6 (D. S. Marlin, E. Sarron and O. Sigurbjornsson), 2018
- Innovation Outlook: Renewable Methanol IRENA and the Methanol Institute, 2021
- How to Make European e-SAF Production Under RefuelEU Aviation Fly? Ifri Memos, French Institute of International Relations (R. Carbonnier), 2026