Material Insights · Understanding the Material World

Internal combustion engines and gensets: Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Combustion chemistry Burning fuel with air releases the heat that raises the gas pressure in the cylinder.
  • Gas laws Heating a gas in a closed space raises its pressure, and that pressure does the work on the piston.
Limited by

as of 2026-11-10

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1824Sadi CarnotShowed that the work a heat engine can give is capped by the temperatures it works between [8]
1850Rudolf ClausiusShowed Carnot's theorem correct and laid the ground for the second law of thermodynamics [8]
1862Alphonse Beau de RochasDescribed the ideal four-stroke operating cycle [1]

as of 2026-11-10

Physical limits

The limits nature sets, today's best and how far there is still to go

LimitUnitBest todayGap
Carnot limit between the flame and the surroundings%53.09% brake thermal efficiency, Weichai heavy-duty diesel, 2024 [2]Heat lost to the cylinder walls, the cooling water and the hot exhaust, plus friction
Knock in spark-ignition engines (the charge self-ignites if squeezed too hard)– Large lean-burn gas engines reach 50.2% electrical efficiency [4]Caps the compression ratio of petrol engines, so they trail diesels

as of 2026-11-10

The science explained

The science behind it explained for a curious reader

Picture a bicycle pump with its outlet blocked. Push the handle in fast and the air inside gets hot, because the work you put in turns into heat. An engine runs this the other way. It squeezes air, adds heat by burning fuel, and lets the hot, high-pressure gas push the piston back out, doing more work than the squeeze took. Carnot showed in 1824 that the share of heat any engine can turn into work depends only on how hot the heat source is and how cold the surroundings are [8]. Real engines fall short of that limit, because heat leaks into the cylinder walls and the exhaust leaves hot. Squeezing the gas harder before burning raises the peak temperature and so the efficiency. Diesels can squeeze harder than petrol engines, because they add the fuel only at the end.

as of 2026-11-10

Sources

  1. Gasoline engine: Development of gasoline engines Encyclopaedia Britannica
  2. Weichai unveils diesel engine with 53.09% brake thermal efficiency DieselNet, 2024
  3. Wärtsilä 50SG gas engine power plant Wärtsilä, 2025
  4. Carnot, Nicolas Léonard Sadi Encyclopedia.com (Encyclopedia of World Biography; Complete Dictionary of Scientific Biography)