Flywheels and small mechanical stores: Overview
What it does
The job the technology does for people, in a short paragraph
A flywheel store keeps electricity as the motion of a fast-spinning rotor and gives it back within seconds. An early use was the Swiss gyrobus, tried on regular routes in 1950 [1] and in service in Yverdon from 1953 [2]. Today flywheel plants steady the frequency of power grids, such as a 20 MW plant in New York from 2011 [5] and a 30 MW plant in Shanxi, China, from 2024 [6]. Racing cars have also used them [7].
as of 2026-11-12
How it works
The working principle in plain words, step by step
A heavy rotor sits on bearings, often inside a vacuum case to cut air drag. It is joined to a motor-generator. To store energy the machine runs as a motor and spins the rotor faster; to release it the machine runs as a generator and the rotor slows down [4]. The energy held grows with the rotor's mass and with the square of its speed, so designers prefer very fast, light rotors. Power electronics match the machine to the grid. Because the rotor slows a little all the time through bearing and drag losses, flywheels suit work that needs fast, frequent cycles rather than storage for hours [4]. The gyrobus worked the same way: at stops a motor spun its flywheel back up, to a top speed of 3,000 rpm, without the driver leaving the seat [1].
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Typical round-trip efficiency, upper end of 85 to 90% range | 90 | % | 2019 | [4] |
| Standby losses of a magnetically supported rotor, upper end of 0.1 to 0.3 W/kg range | 0.3 | W/kg | 2019 | [4] |
| Stephentown, New York, plant power (200 flywheels) | 20 | MW | 2011 | [5] |
| Changzhi, Shanxi, plant power (120 flywheel units) | 30 | MW | 2024 | [6] |
| Peak power of a racing flywheel hybrid, in 6 to 8 second bursts | 150 | kW | 2011 | [7] |
as of 2026-11-12. 2019 is the publication year of the review that gives the efficiency and loss figures as typical values, not a data year [4]; the plant and racing figures are from announcements and articles of the years shown [5][6][7].
Where it is used
The main places and products the technology is found in
- Grid frequency regulation plants in the United States and China [5][6]
- Racing hybrids, where a composite flywheel boosts the drivetrain in short bursts [7]
- Flywheel buses of the 1950s in Switzerland, the Belgian Congo and Belgium [2][3]
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- Grid plants of tens of megawatts, such as the 30 MW Changzhi plant in China, which its reporter calls the world's largest [6]
- Unit
- MW
- Year
- 2024
- Note
- No world total of installed flywheel storage was found in the sources opened.
as of 2026-11-12
Sources
- The Gyrobus in Practical Form Commercial Motor (22 December 1950, p. 48), 1950
- Autobus vor Kirche Verkehrshaus der Schweiz (Swiss Museum of Transport), collection record
- Le Gyrobus: an electric bus in colonial Kinshasa Technology's Stories 8(2) (R. Heinze), Society for the History of Technology, 2020
- The Status and Future of Flywheel Energy Storage Joule 3(6), pp. 1394 to 1399 (K. R. Pullen), accepted manuscript at City Research Online, City, University of London, 2019
- Beacon Power Flywheel Plant in Stephentown Reaches Full 20 MW Capacity Beacon Power (company press release, via GlobeNewswire), 2011
- China connects its first large-scale flywheel storage project to grid ESS News (pv magazine), 2024
- Composite flywheel: HEV racing dynamo CompositesWorld (M. LeGault), 2011