Generators and alternators: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Electromagnetic induction A changing magnetic field through a coil induces the voltage that every generator delivers.
- Ferromagnetism and magnetic domains Iron cores and permanent magnets concentrate the magnetic field so a compact machine can make a strong voltage.
- Maxwell's equations Maxwell's equations describe the fields designers calculate when they shape poles, slots and windings.
- Ohm's law Current flowing through the resistance of the copper windings turns some power into heat, the main loss in large machines.
as of 2026-11-10
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1831 | Michael Faraday | Discovered electromagnetic induction with his ring coil on 29 August [1] |
| 1831 | Michael Faraday | Spun a copper disc between magnet poles and drew a continuous direct current [2, 12] |
| 1832 | Hippolyte Pixii | Built the first hand-cranked magneto, a permanent magnet moved past coils [3] |
as of 2026-11-10
Physical limits
The limits nature sets, today's best and how far there is still to go
| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Conservation of energy: no heat-engine (Carnot) limit applies, so the ceiling is converting all shaft power | 100 | % | Up to 99% for the largest hydrogen- and water-cooled units [6] | About 1%, lost as heat in winding resistance, magnetic losses in the iron core, friction and gas drag |
| Cooling: the heat from losses must leave before insulation overheats | – | MVA | 2,250 MVA with hydrogen-cooled rotor and water-cooled stator windings [6] | Larger ratings need better cooling and stronger rotor forgings |
as of 2026-11-10
The science explained
The science behind it explained for a curious reader
Picture a loop of wire and a magnet. Hold them still and nothing happens. Move the magnet, and for as long as the field through the loop is changing, a current flows. Faraday found this in 1831 [1]. A generator simply keeps the change going by spinning a magnet inside coils, or coils past a magnet. The current then makes its own magnetic field, which drags on the rotor, so the turbine has to push harder the more power is drawn: that is energy being conserved. Because this is not a heat engine, nothing like the Carnot limit caps it. The only losses are heat in the copper, magnetic losses in the iron and friction, which is why the biggest units turn up to 99% of the power they receive into electricity [6].
as of 2026-11-10
Sources
- Michael Faraday's ring-coil apparatus The Royal Institution
- Michael Faraday (biography) The Institution of Engineering and Technology (IET Archives)
- Magneto, 1832 National High Magnetic Field Laboratory (Magnet Academy)
- GIGATOP generators Arabelle Solutions, 2025
- Faraday Unipolar Generator Joseph Henry Project, Princeton University