Material Insights · Understanding the Material World

Hydrogen storage: Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Gas laws Boyle's law of 1662, that a gas's volume falls as its pressure rises [6], is why compression packs more hydrogen into a tank or cavern.
  • Surface chemistry and adsorption Solid stores hold hydrogen bound to the surface or inside the lattice of metals and other materials, releasing it when heated.
Limited by
  • Second law of thermodynamics Real compressors need more than the ideal minimum work: DOE measured 1.7 to 6.4 kWh/kg for on-site compression, against a theoretical 1.36 kWh/kg to reach 700 bar [2].

as of 2026-11-12

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1662Robert BoyleShowed that the volume of a gas varies inversely with its pressure [6]
1766Henry CavendishDescribed 'inflammable air', now called hydrogen, and found it about 11 times less dense than air [8]
1898James DewarFirst liquefied hydrogen [7]

as of 2026-11-12

Physical limits

The limits nature sets, today's best and how far there is still to go

LimitValueUnitBest todayGap
Ideal (isothermal) work to compress hydrogen from 20 to 700 bar1.36kWh/kg1.7 to 6.4 kWh/kg measured for on-site compression [2]Practical compressors use roughly one and a quarter to five times the ideal work (calculated)

as of 2026-11-12. The gap is calculated from the record's figures [2] (1.7 / 1.36 and 6.4 / 1.36); the measured range is DOE technology validation data for compression from on-site production, and the record does not give the end pressure for it, so the comparison is approximate.

The science explained

The science behind it explained for a curious reader

Hydrogen holds more energy per kilogram than petrol, but it is the lightest gas, so a kilogram of it at normal pressure fills a room. Cavendish found in 1766 that it is about 11 times less dense than air [8]. Storing it is therefore a fight for space. Boyle's law says that halving the volume doubles the pressure [6], so the first answer is to squeeze it, to 700 bar in a car tank [3]. The second is to chill it below its boiling point, which Dewar first managed in 1898 [7]; liquid hydrogen is far denser but costs about a third of its energy to make [2]. The third is to lock the molecules into a solid or a carrier liquid. For bulk storage, salt caverns are the simplest answer: rock salt is almost impermeable to gas and can heal itself [1].

as of 2026-11-12

Sources

  1. The geomechanics of hydrogen storage in salt caverns: environmental considerations Environment Agency, Chief Scientist's Group report SC240045/R (D. Smith, H. Brooks and S. Loveless), September 2025, 2025
  2. DOE Hydrogen Program Record 9013: Energy requirements for hydrogen gas compression and liquefaction US Department of Energy, 2009
  3. Onboard Type IV Compressed Hydrogen Storage System - Cost and Performance Status (Program Record 24006) US Department of Energy, Hydrogen Program, 2025
  4. Robert Boyle Science History Institute
  5. Dewar, James Encyclopedia.com (from Chemistry: Foundations and Applications; no year shown)
  6. Henry Cavendish was instrumental in unveiling the components of the air that we breathe Chemistry World, Royal Society of Chemistry (feature by Mike Sutton)