Material Insights · Understanding the Material World

Heat pumps, air conditioning and refrigeration: Science

Principles

The science it rests on, with why each principle matters to it

Relies on 4
  • Latent heat A refrigerant takes in a lot of heat when it boils and gives it out when it condenses, which carries the heat round the loop.
  • Vapour-liquid equilibrium (Raoult's law) A fluid's boiling point rises with pressure, so compressing the vapour lets it condense at a temperature above the room.
  • Joule-Thomson effect Letting the refrigerant expand through a valve cools it before it re-enters the cold coil.
  • Second law of thermodynamics Heat will not flow from cold to warm on its own, so work must be supplied to push it uphill.
Limited by

as of 2026-11-10

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1824Sadi CarnotPublished his analysis of steam engines; his ideal cycle run in reverse sets the heat pump's limit [3]
1852William Thomson (Lord Kelvin)Gave the first published description of a heat pump, for heating and cooling buildings [3]
1856Peter von RittingerBuilt a vapour-recompression heat pump to dry brine for salt, the first industrial trial [3]

as of 2026-11-10. Pearson calls Rittinger's plant the first practical industrial heat pump [3]; Zogg says the pilot plant never worked successfully [4].

Physical limits

The limits nature sets, today's best and how far there is still to go

LimitUnitBest todayGap
Carnot limit on heat moved per unit of work, set by the temperatures of the cold source and the warm sinkCOPHeat pumps on the market are three to five times as energy efficient as gas boilers [6]Real machines lose work in the compressor and expansion valve and need temperature differences across their coils; the limit falls in cold weather
Efficiency of the air conditioners people buy against the best on sale%The average unit sold is less than half as efficient as typical units available [7]Standards and labels can more than double average efficiency with existing technology

as of 2026-11-10

The science explained

The science behind it explained for a curious reader

Think of a heat pump as a water pump for heat. Heat, like water, runs downhill on its own, from warm to cold. To lift it uphill you need a pump and some work. The trick is a fluid that boils at a low temperature. Let it boil in a cold coil and it soaks up heat, just as sweat cools skin by evaporating. Squeeze the vapour and it gets hot enough to give that heat away in a warm coil. Kelvin described a heat pump for heating buildings in 1852 [3]. The smaller the hill, the less work is needed, so a heat pump does best when the outside is mild and the radiators run cool. That is why units on the market can deliver three to five times the useful heat of a gas boiler for the same energy [6].

as of 2026-11-10

Sources

  1. Scotland's role in the development of heat pumps: 1850 to 2050 (IESIS Presidential Address) Institution of Engineers and Shipbuilders in Scotland (Andy Pearson), 2020
  2. Heat pumps: the core technology for sustainable heating International Institute of Refrigeration, 2023
  3. The Future of Cooling International Energy Agency