Next-generation lithium batteries: Overview
What it does
The job the technology does for people, in a short paragraph
Next-generation lithium batteries aim to store more energy per kilogram, and more safely, than today's lithium-ion cells. They replace the flammable liquid electrolyte with a solid, use lithium metal as the negative electrode, or use sulphur as the positive one. Lithium-metal batteries with a solid polymer electrolyte powered shared cars in Paris from 2011 [8][9]. Semi-solid-state cells are already sold [6], and the first cars with all-solid-state batteries are planned for 2027 and 2028 [6].
as of 2026-11-12
How it works
The working principle in plain words, step by step
All lithium batteries move lithium ions between two electrodes while electrons flow through the outside circuit. Today's cells hold the lithium in graphite and carry the ions through a flammable liquid. Pure lithium metal would store far more, but it is so reactive that early lithium-metal cells were too explosive to sell [1]. A solid electrolyte such as Lipon, made at Oak Ridge in 1991 [2], is stable against lithium metal [3], so it can sit between the metal and the cathode. Some sulphide solids conduct lithium ions better than liquid electrolytes do [4]. Polymer electrolytes, used in semi-solid-state cells, need warming to about 60 to 90 °C [6]. Lithium-sulphur cells swap the metal oxide cathode for sulphur, which can in theory store far more energy [5].
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Theoretical specific energy of a lithium-sulphur battery | 2600 | Wh/kg | 2022 | [5] |
| Specific energy of a lithium-sulphur pouch cell tested under practical conditions | 400 | Wh/kg | 2022 | [5] |
| Room-temperature lithium-ion conductivity of the superionic solid Li10GeP2S12 | 12 | mS/cm | 2011 | [4] |
| Upper operating temperature of polymer electrolytes in semi-solid-state cells | 90 | °C | 2026 | [6] |
as of 2026-11-12. 2022 and 2026 are publication years: the sentences give no separate data year. The polymer range is about 60 to 90 °C [6].
Where it is used
The main places and products the technology is found in
- Lithium-metal-polymer batteries in Bluecar shared electric cars, Paris, from 2011 [8]
- Semi-solid-state batteries with a solid polymer electrolyte, already on sale [6]
- All-solid-state batteries planned for premium electric cars from 2027 and 2028 [6]
- Thin-film rechargeable lithium batteries with a ceramic Lipon electrolyte [2]
- Lithium-sulphur pouch cells at the test stage [5]
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Year
- 2026
- Note
- No world output figure was found. The IEA expects all-solid-state batteries to stay in premium cars until the first half of the 2030s [6].
as of 2026-11-12
Sources
- The Nobel Prize in Chemistry 2019, press release The Royal Swedish Academy of Sciences, 2019
- Thin-Film Rechargeable Lithium Batteries (N. J. Dudney, J. B. Bates and D. Lubben, Oak Ridge National Laboratory) US Department of Energy, OSTI accomplishments (archived by the University of North Texas Libraries), 1995
- Esteemed batteries researcher Dudney named to National Academy of Engineering DOE/Oak Ridge National Laboratory, on EurekAlert!, 2022
- Development of a Superionic Conductor Exhibiting the Highest Known Lithium-Ion Conductivity Japan Atomic Energy Agency (press release), 2011
- Evaluation on a 400 Wh/kg lithium-sulfur pouch cell (Ye et al., Journal of Energy Chemistry 66, 24-29) Journal of Energy Chemistry, 2022
- Global EV Outlook 2026: Electric vehicle batteries International Energy Agency, 2026
- Paris revs up for electric car rentals Phys.org (AFP report), 2011
- "Actually, we are the pioneer of solid-state battery" (interview with Blue Solutions, by Cora Werwitzke) electrive.com, 2021