Electric motors and drives: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Magnetic effect of an electric current A current makes a magnetic field, so the stator windings can create the field that pulls the rotor round [1].
- Electromagnetic induction In an induction motor the spinning field induces the rotor currents that carry the torque.
- Ferromagnetism and magnetic domains Iron cores concentrate the field, and permanent magnets supply a field without any current.
- Ohm's law Resistance in the copper or aluminium windings turns part of the current into heat, often the largest single loss.
as of 2026-11-11
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1820 | Hans Christian Oersted | Found that an electric current deflects a compass needle, so currents make magnetic fields [1] |
| 1821 | Michael Faraday | Showed electromagnetic rotation, a wire turning continuously round a magnet [1] |
| 1831 | Michael Faraday | Discovered electromagnetic induction, the effect behind the induction motor [1] |
as of 2026-11-11
Physical limits
The limits nature sets, today's best and how far there is still to go
| Limit | Unit | Best today | Gap |
|---|---|---|---|
| No heat-engine (Carnot) limit: losses are resistance, magnetic and friction losses | % | IE4 class minimum 96.7% at 355 to 400 kW, 4-pole, 50 Hz [4] | A few per cent, lost as heat in windings and iron and as friction |
| Small machines lose a larger share | % | IE4 class minimum 85.7% at 0.75 kW [4] | Magnetising and friction losses do not shrink in step with size |
as of 2026-11-11
The science explained
The science behind it explained for a curious reader
Think of a compass needle chasing a magnet that you carry round it in a circle. A motor does the same thing without anything moving outside. Three sets of windings in the stator carry currents that rise and fall one after another, and together they make a magnetic field that sweeps round like the carried magnet. The rotor follows. In an induction motor the rotor has no magnets at all: the moving field induces currents in its bars, and those currents feel a push from the field, so the rotor is dragged along a little slower than the field turns. Oersted's discovery of 1820 that currents make magnetic fields, and Faraday's rotation of 1821, are the root of it [1]. Because a motor converts one ordered form of energy into another, no heat-engine limit applies, and large motors lose only a few per cent [4].
as of 2026-11-11
Sources
- The invention of the electric motor 1800-1854 Karlsruhe Institute of Technology, Elektrotechnisches Institut
- Technical note: IEC 60034-30-1 standard on efficiency classes for low voltage AC motors ABB, 2018