Material Insights · Understanding the Material World

Nickel-based batteries: Overview

What it does

The job the technology does for people, in a short paragraph

Nickel-based batteries store electricity in tough, long-lived cells that survive rough handling. Jungner patented the nickel-cadmium cell in 1899 and Edison's nickel-iron cell reached the market in 1904 [1]. Nickel-metal hydride cells followed in 1990 [3] and powered the first mass-produced hybrid car in 1997 [4]. Lithium batteries have taken most consumer uses, but nickel-cadmium cells keep industrial roles where reliability matters [6].

as of 2026-11-12

How it works

The working principle in plain words, step by step

Each cell has a positive electrode based on nickel and a negative electrode of cadmium, iron or a metal alloy that soaks up hydrogen. The two sit in an alkaline liquid, a solution of a strong base rather than an acid. On discharge the negative electrode gives up electrons, which flow through the outside circuit to the nickel electrode, while the liquid carries the charge back between them. Charging reverses the reactions. The alkaline liquid takes no part in the overall reaction, unlike the acid in a lead-acid battery, which is one reason the cells tolerate deep discharge and long service. Hybrid cars use stacks of such cells; Toyota's bipolar design of 2021 gives about twice the output of its earlier pack [5].

as of 2026-11-12

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
World refinery production of cadmium, mainly used in NiCd batteries23,000t2025[6]
China's share of world refined cadmium (calculated)41%2025[6]
Indonesia's share of world nickel mine output (calculated)67%2025[7]
EU limit on cadmium in portable batteries, under the 2023 battery regulation0.002% by weight2023[8]
Output of Toyota's bipolar NiMH pack relative to the previous Aqua pack2times2021[5]

as of 2026-11-12. Shares are calculated from USGS 2025 estimates: 9,500 of 23,000 t of refined cadmium [6] and 2.6 of 3.9 million t of nickel [7]. The cadmium limit is set by the EU battery regulation published in 2023, whose general provisions apply from 18 February 2024 [8].

Where it is used

The main places and products the technology is found in

  • Industrial nickel-cadmium batteries where reliability and long life matter [6]
  • Drive batteries of hybrid cars, from the first Prius of 1997 to the Aqua of 2021 [4][5]
  • Rechargeable AA and AAA consumer cells, such as eneloop from 2005 [3]
  • Forklift trucks and mine and switching locomotives, historically with nickel-iron cells [1]

as of 2026-11-12

Scale today

How much of it there is now: units in use, made each year and who uses it

Made per year
World refined cadmium output of about 23,000 t, most of it used in NiCd batteries [6]
Unit
t of cadmium
Year
2025
Note
No source opened counts nickel-based battery output directly, so the cadmium supply, whose main use is NiCd batteries, stands in for the NiCd share of the market.

as of 2026-11-12

Sources

  1. The Edison Nickel-Iron Alkaline Storage Cell (Museum Notes, Oesper Collections) William B. Jensen, Department of Chemistry, University of Cincinnati, 2013
  2. History (Panasonic Energy) Panasonic
  3. Milestones: Toyota Prius, the world's first mass-produced hybrid vehicle, 1997 IEEE, Engineering and Technology History Wiki, 2024
  4. Toyota to launch all-new Aqua (bipolar nickel-metal hydride drive battery), 19 Jul 2021 Toyota Motor Corporation, 2021
  5. Mineral Commodity Summaries 2026: Cadmium US Geological Survey, 2026
  6. Mineral Commodity Summaries 2026: Nickel US Geological Survey, 2026
  7. EU issues new regulation on batteries and waste batteries (Regulation (EU) 2023/1542) SGS, 2023