Material Insights · Understanding the Material World

Conventional oil and gas production: Overview

What it does

The job the technology does for people, in a short paragraph

Conventional oil and gas production drills wells into porous rock where oil and gas have collected under a seal, and lets them flow up under the reservoir's own pressure or with pumps. Wells near Baku from 1846 [1] and Drake's at Titusville in 1859 [2] began the industry. Oil and gas from all sources supply a large part of the world's energy: about 100.6 million barrels of oil a day and 4,197 billion cubic metres of gas in 2025 [3].

as of 2026-11-11

How it works

The working principle in plain words, step by step

Oil and gas form from the remains of tiny organisms buried in sediment and slowly cooked by the Earth's heat. Being light, they creep upwards through porous rock until a layer of tight rock stops them, often in an arch of folded strata or against a fault. Geologists find such traps by mapping rock layers and by seismic surveys, which bounce sound waves off buried layers [4]. A rig then drills a well, lined with steel pipe cemented into the hole, while heavy drilling mud holds back the reservoir's pressure. Once the well is opened, that pressure pushes oil and gas to the surface. As it falls, pumps or injected gas lift the oil, and water or gas pumped back into the reservoir keeps the pressure up. At the surface, separators split oil, gas and water.

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
World oil production, all types100.59million barrels a day2025[3]
World natural gas production, all types4196.5billion cubic metres2025[3]
US oil production, the world's largest21.1million barrels a day2025[3]
Depth at which Drake struck oil69feet1859[2]

as of 2026-11-11. The world oil total includes crude oil, shale oil, oil sands, condensates and natural gas liquids, and the gas total all natural gas [3]; no opened source gives the conventional share worldwide. In the United States tight oil was about 64% of crude output in 2023 [7], so conventional fields there are the smaller part.

Where it is used

The main places and products the technology is found in

  • Large conventional fields in the Middle East, Russia and the Caspian region, where drilled oil began [1]
  • Offshore shelves and deep water, from Baku's bay to the North Sea and the Gulf of Mexico
  • Crude oil for refineries, which turn it into transport fuels and chemical feedstocks [3]
  • Natural gas for power stations, heating and industry; gas made about 22% (calculated) of world electricity in 2025 [3]

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Made per year
about 100.6 million barrels of oil a day and 4,197 billion cubic metres of gas in 2025, all types [3]
Users
the whole world economy; the United States is the largest producer of both oil and gas [3]
Unit
million barrels a day; billion cubic metres a year
Year
2025
Note
The totals include unconventional output and, for oil, natural gas liquids [3]; the opened sources do not split world production by reservoir type. The US produced 1,073.7 billion cubic metres of gas in 2025, about 26% (calculated) of the world total; the review's text says approximately 30%, which its own table does not bear out, so the table is used [3].

as of 2026-11-11

Sources

  1. Azerbaijan: The Land of Unquenchable Fire Journal of Petroleum Technology, Society of Petroleum Engineers, 2024, article by Pat Davis Szymczak, 1 July 2024
  2. #40 Drake Oil Well American Society of Mechanical Engineers, Engineering History Landmarks
  3. Statistical Review of World Energy 2026 Energy Institute, 2026, 75th edition; oil production table (thousand barrels daily), natural gas production table (p. 48), electricity generation by fuel table (p. 64)
  4. John Karcher SEG Wiki, Society of Exploration Geophysicists