Material Insights · Understanding the Material World

Railway electrification and wireless power: Overview

What it does

The job the technology does for people, in a short paragraph

Railway electrification lets trains and trams draw power from the grid as they run, through an overhead wire or a live rail, instead of carrying fuel. It began with a small Siemens demonstration train in Berlin in 1879 [1]. About three-quarters of the world's passenger rail activity now runs on electric trains [2]. Wireless charging pads use the same physics to charge parked electric cars without a plug [4].

as of 2026-11-12

How it works

The working principle in plain words, step by step

A substation takes power from the grid and feeds it to a conductor laid along the track: an overhead contact wire hung from masts, or an extra rail beside the running rails. The train presses a sprung pantograph against the wire, or a sliding shoe against the live rail, and the current flows through its motors and back to the substation through the wheels and running rails. The first lines simply used the two running rails as the go and return wires, which could give a shock to anyone touching both [1]; overhead wires with pantographs followed, as on the Lichterfelde extension of 1890 [1]. Wireless charging works by induction: an alternating current in a coil in the ground makes a changing magnetic field, which drives a current in a matching coil under the car [4][8].

as of 2026-11-12

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Share of world passenger rail activity on electric trains75%2019[2]
Rail's share of world transport energy demand2%2019[2]
Rail's share of world passenger transport8%2019[2]
Power of SAE J2954 wireless charging for light vehicles, upper end11kW2024[4]
Efficiency of SAE J2954 wireless charging, upper end93%2024[4]

as of 2026-11-12. The IEA figures describe 'today' in a report published in 2019; 2019 is the publication year, not the data year, and the report's charts run to 2016 [2]. The wireless figures are from a 2024 report of the revised SAE standard [4][9].

Where it is used

The main places and products the technology is found in

  • Electric main-line and high-speed railways [2][3]
  • Tramways and trolleybus services fed by overhead wires [1][5]
  • Electric freight trains, about half of world freight movements by rail [3]
  • Wireless charging pads for parked light electric vehicles [4]

as of 2026-11-12

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
Electric rail carries about 80% of passenger rail activity and half of rail freight movements worldwide [3]
Users
Rail carries 8% of the world's passengers and 7% of its freight [2]
Unit
% of rail activity
Note
The IEA tracking page gives no year for its shares [3]; its earlier report gave three-quarters of passenger rail activity for 2019 [2]. No world count of wireless charging pads was found.

as of 2026-11-12

Sources

  1. A streetcar named Straßenbahn Groß-Lichterfelde, or, How Telegraphen-Bau-Anstalt von Siemens & Halske put in service the world's first electric streetcar Ingenium, Canada's Museums of Science and Innovation
  2. The Future of Rail IEA, 2019
  3. Rail International Energy Agency, tracking report
  4. SAE International publishes new standard for wireless light-duty EV charging Charged EVs (Charles Morris), trade press, 2024
  5. Cadmium Copper Copper Development Association, 60 Centuries of Copper
  6. Michael Faraday's ring-coil apparatus The Royal Institution