Run-of-river and small hydro: Overview
What it does
The job the technology does for people, in a short paragraph
Small hydro turns the flow of rivers and streams into power without a large dam. For more than two thousand years water wheels ground grain [1]; since the 1870s small turbines have also driven generators, first lighting a house at Cragside in England [2]. Plants of up to 10 MW now total about 79 GW worldwide, and much of the potential is still unused [3].
as of 2026-11-11
How it works
The working principle in plain words, step by step
Water flowing downhill carries energy set by two things: how far it drops, called the head, and how much flows each second [5]. A run-of-river scheme has no large reservoir [5]. A low weir turns part of the river into a channel or pipe, which leads it to a turbine below and then back to the river. The water spins the turbine, and a generator on the same shaft makes electricity. The turbine is chosen to suit the site: Kaplan propeller turbines for low heads and large flows, Francis turbines for middling ones and Pelton wheels, struck by jets, for high heads and small flows [5]. Because there is little storage, output rises and falls with the river and the rain upstream [5].
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Installed small hydropower capacity, plants up to 10 MW | 79 | GW | 2022 | [3] |
| Share of the world's small hydro potential still untapped | 64 | % | 2022 | [3] |
| Asia's share of installed capacity in plants up to 10 MW | 64 | % | 2022 | [4] |
| Peak turbine efficiency for small hydro | 92 | % | 2015 | [5] |
as of 2026-11-11. The capacity, potential and Asia figures are UNIDO estimates from the 2022 edition of its World Small Hydropower Development Report [3][4]; 2022 is the report's publication year, not a data year, which the pages do not give. The turbine figure is 'up to 92%' from a technology brief published in 2015 [5], again a publication year.
Where it is used
The main places and products the technology is found in
- Grid-connected run-of-river plants on mountain rivers
- Village mini-grids in remote areas [5]
- Water mills for grinding grain, now mostly historic [1]
- Small turbines on canals, water mains and old mill sites
as of 2026-11-11
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- About 79 GW in plants of up to 10 MW [3]
- Users
- Asia has 64% of the capacity in plants up to 10 MW [4]
- Unit
- GW of generating capacity
- Year
- 2022
- Note
- UNIDO estimates from the 2022 edition (the publication year; no data year is given) [3][4]; capacity rose about 1% on the 2019 edition [3]. The sources opened give no yearly additions.
as of 2026-11-11
Sources
- The application of animal and water power: From the Mediterranean to Britain The Mills Archive (From Quern to Computer: the history of flour milling)
- Cragside: harnessing the power of water IET Archives blog, 2023
- World Small Hydropower Development Report 2022 UNIDO, 2022
- Harnessing the untapped potential of small hydropower for sustainable development UNIDO Industrial Analytics Platform (Eva Kremere, UNIDO)
- Hydropower: Technology Brief E06 (Table 2, turbine efficiency) IRENA and IEA-ETSAP, 2015