Material Insights · Understanding the Material World

Small, airborne and traditional wind: Overview

What it does

The job the technology does for people, in a short paragraph

Small wind machines catch the wind where it is needed: to grind grain, pump water, power a farm or remote house, or help push a ship. Windmills were recorded in Persia by the 10th century [1], and Dutch mills drained whole polders [2]. Today's small turbines, below 100 kW, are a niche: the United States added just 737 of them in 2025 [3].

as of 2026-11-11

How it works

The working principle in plain words, step by step

Wind turbine blades work like an aircraft wing: air flowing past lowers the pressure on one side, and the lift this creates turns the rotor [7]. A shaft, often through a gearbox, drives a generator that makes electricity [7]; in a traditional windmill the shaft drove millstones or pumps instead [2]. The power in the wind rises with the cube of its speed, so a site with slightly stronger wind gives much more energy, but no rotor can capture more than 59.3% of it, the Betz limit [5]. Airborne systems fly a large kite in figure-of-eight loops on a tether; the pull on the line unwinds a winch on the ground, and the winch's brake makes the electricity [4].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Small wind (up to 100 kW) deployed in the United States1.7MW2025[3]
Average installed cost of new US small wind projects9630USD/kW2025[3]
Average capacity factor of a sample of 69 US small wind projects14%2025[3]
Cumulative US distributed wind capacity (all sizes)1093MW2025[3]
Betz limit: the most power any rotor can take from the wind59.3%1919[5]

as of 2026-11-11. The 1.7 MW came from 737 turbines; distributed wind also counts turbines larger than 100 kW, over 93,000 turbines in all [3]. The Betz limit carries 1919, the year the source gives for its derivation.

Where it is used

The main places and products the technology is found in

  • Homes, farms and small businesses, often with solar panels and batteries [7]
  • Remote telecom, monitoring and off-grid sites
  • Historic windmills for grinding and drainage, such as the 19 mills of Kinderdijk [2]
  • Rotor sails, wing sails and towing kites on cargo ships [8]
  • Kites and tethered wings flying in stronger winds aloft [4]

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
US distributed wind 1,093 MW from over 93,000 turbines in 2025 [3]
Made per year
737 small turbines with 1.7 MW deployed in the United States in 2025 [3]
Users
Homes, farms, businesses and remote sites [7]
Unit
MW of generating capacity
Year
2025
Note
No world total was found in the sources opened; the US figures are the best documented.

as of 2026-11-11

Sources

  1. First Windmill Use Environment & Society Portal, Rachel Carson Center for Environment and Society (LMU Munich and Deutsches Museum)
  2. Mill Network at Kinderdijk-Elshout Werelderfgoed Nederland (Dutch World Heritage foundation), 2024
  3. Distributed Wind Energy Technologies Data Update: 2026 Summary (calendar year 2025 data) Pacific Northwest National Laboratory, 2026
  4. After a shaky start, airborne wind energy is slowly taking off Yale Environment 360, 2022
  5. 6. Limits on Conversion of Wind Into Electricity (ECE 333 Green Electric Energy, lecture 6) University of Illinois at Urbana-Champaign
  6. How Do Wind Turbines Work? US Department of Energy, Wind Energy Technologies Office
  7. Wind-powered cargo ships sail past the 100-vessel milestone American Journal of Transportation, 2026