Material Insights · Understanding the Material World

Float glass

Molten glass floated on a bath of molten tin sets into flat, smooth sheets without grinding.

Making materials · Ceramics, glass and cement · No. 404

  • Electronic age
  • Readiness 9 of 9
  • Process
Making materials · Technology

Molten glass floated on liquid tin sets perfectly flat, and in 2006 about 90% of plate glass was made that way.

Chart: Illustration: Float glass

Where it comes from

Chart: Map of where it comes from

Alastair Pilkington had the idea in 1952, and experiments began that December. A sheet made wholly by float was produced in July 1958 and the process was announced to the glass world in January 1959.

Three things to know
  1. Pilkington spent seven years and about 28 million pounds developing the process before it was announced in January 1959.
  2. A float line runs day and night for 16 to 20 years without a stop, and an average European line makes 650 tonnes of glass a day.
  3. Up to 9 gigajoules of energy are needed for each tonne of float glass, with about 90% of it from natural gas.
The journey
  1. 1 BatchSand, soda ash, lime and recycled glass are weighed and mixed
  2. 2 MeltingA gas-fired furnace melts the batch into clear glass
  3. 3 Tin bathThe glass pours onto molten tin and spreads into a flat ribbon
  4. 4 AnnealingA long oven called a lehr cools the ribbon slowly so it does not crack
  5. 5 CuttingThe cold ribbon is cut into sheets
Go deeper pick a tab to open it in full