Froth flotation: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Surface chemistry and adsorption Collectors bind to the surface of the wanted mineral and make it water-repellent, so it sticks to air bubbles [3].
as of 2026-11-11
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1885 | Carrie J. Everson | Patented separating certain ores with oil, which wets metal-bearing minerals but not rock [5] |
| 1905 | Minerals Separation Ltd | A small amount of oil with fine air bubbles carries the minerals up as a froth [2] |
| 1925 | Cornelius H. Keller | Xanthates as selective collectors for sulphide minerals [4] |
as of 2026-11-11
The science explained
The science behind it explained for a curious reader
Water clings to most rock but slides off some surfaces, as it beads on a waxed car. Flotation uses that difference. The collector chemical is like wax applied to only one kind of grain: it sticks to, say, copper sulphide but not to quartz [3]. Once waxed, a grain would rather touch air than water. When a bubble passes, the grain jumps onto it and is lifted to the top, while the wet waste grains sink back [3]. Each bubble can carry many small grains, so a froth of bubbles skims off the mineral like cream off milk. Keller's xanthates of 1925 made the wax far more selective [4].
as of 2026-11-11
Sources
- Historical Note: Minerals Separation Ltd Australian Science and Technology Heritage Centre (published April 2004, updated 2019), 2004
- Flotation Encyclopaedia Britannica
- Cornelius H. Keller National Mining Hall of Fame
- Summary of "Notes on Flotation" (F. A. Eastaugh, lecture of 17 December 1912) Sydney University Engineering Society, on Sydney Open Journals, 1912