Gear train: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Lever and mechanical advantage Each meshing pair acts as a pair of levers of different lengths, so force rises as speed falls in the same ratio.
- Newton's laws of motion Tooth forces, shaft torques and the inertia of the wheels follow Newton's laws, which set how strong teeth and bearings must be.
- First law of thermodynamics A gear cannot add energy: power out equals power in minus friction losses, so every gain in force is paid for in speed.
as of 2026-11-10
The science explained
The science behind it explained for a curious reader
Think of a gear as a lever that never runs out of travel. A long spanner turns a stiff nut because force at a long arm becomes a bigger force at a short one. A small gear driving a large one does the same, tooth after tooth: the large wheel's teeth sit further from its centre, so the push on them makes a bigger turning effect. Energy is not made in the process. If the output turns with four times the force, it turns at a quarter of the speed, and some energy is lost to friction where the teeth slide. Good tooth shapes keep that sliding small: a helical mesh may be about 97% efficient, while a worm gear, which slides more, may be only 60 to 70% efficient [4].
as of 2026-11-10
Sources
- Wind Turbines: Clean Energy, but Energy-Efficient? Gear Technology (Jack McGuinn), 2011