Material Insights · Understanding the Material World

Rib vault and flying buttress: Science

Principles

The science it rests on, with why each principle matters to it

Relies on

as of 2026-11-10

The science explained

The science behind it explained for a curious reader

Picture an umbrella. The thin fabric weighs little; the ribs carry it and bring its load to a few points. A Gothic vault works the same way in stone. The ribs gather the weight of the thin panels and bring it down to the corners of each bay [6]. A pointed arch helps, because it sends its force more steeply down and less sideways [1]. Some sideways push is left, and a tall vault exerts it high above the ground, where a thin wall would be shoved outwards. The flying buttress catches that push in mid-air and passes it to a heavy pier outside [4], like a hand pressing against the side of a leaning wall. Everything must stay in compression; masonry fails through instability, not crushing [6], as Beauvais found in 1284 [5].

as of 2026-11-10

Sources

  1. Birth of the Gothic: Abbot Suger and the ambulatory at St. Denis (Beth Harris and Steven Zucker) Smarthistory
  2. Flying buttresses before 1180 (John James, adapted from the Journal of the Society of Architectural Historians 51, 1992, pp. 261 to 287) The Creation of Gothic Architecture (creationofgothic.org)
  3. History of Beauvais Cathedral Association Beauvais Cathédrale
  4. Equilibrium Systems: Studies in Masonry Structure Massachusetts Institute of Technology (Philippe Block, SMArchS thesis), 2005