Material Insights · Understanding the Material World

Hot-metal typesetting: Overview

What it does

The job the technology does for people, in a short paragraph

Hot-metal machines set text for printing by casting it in metal as the operator types. They replaced the hand setting of individual letters. The Linotype entered the New York Tribune in 1886 [1], and a Linotype operator worked four to eight times faster than a hand compositor [2]. By 1911 there were 25,000 Linotypes in daily use [2]. Computer typesetting replaced them in the 1970s [5].

as of 2026-11-11

How it works

The working principle in plain words, step by step

The operator types at a keyboard. Each key releases a small brass mould, a matrix, with one letter cut into its edge, and the matrices drop into a row with wedge-shaped spacers between words. When the line is full, the spacers are pushed up to spread the words to the exact width. The machine then forces molten type metal against the row, casting a solid bar, the slug, with the whole line of raised letters on top [2]. The matrices are lifted back to the magazine and sorted by notches cut into them, ready for reuse. The Monotype works differently: its keyboard punches holes in a paper ribbon, and a separate caster reads the holes with air and casts single letters [4]. Used slugs and type are melted down again.

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Ems set in an hour by a first-time Linotype user1100ems per hour (over)1891[2]
Linotypes in daily use25,000machines1911[2]
Speed of a Linotype operator compared with a hand compositor8times faster (four to eight)– [2]
Typical speed expected of a hand compositor before the Linotype700ems per hour1870[6]

as of 2026-11-11. An em is a square unit of type width. The 700 ems an hour describes hand compositors at the time of a typesetting race in 1870 [6]. The Skyscraper Museum gives no year for the four-to-eight-times comparison and the page shows no publication date, so that year is left blank [2].

Where it is used

The main places and products the technology is found in

  • Daily newspapers, the main users of the Linotype
  • Book printing, where the Monotype's single letters allowed fine corrections
  • Magazines and jobbing printers
  • Museums and small presses that still run working machines today

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
A few working machines in museums and small presses, such as the International Printing Museum's Linotypes [1]
Unit
machines
Note
No opened source counts machines still in use; the New York Times stopped hot-metal setting in 1978 [5].

as of 2026-11-11

Sources

  1. 1895 Linotype International Printing Museum
  2. The Skyscraper Museum: NEWS PAPER SPIRES WALKTHROUGH The Skyscraper Museum
  3. Monotype Composition Caster National Print Museum, Dublin
  4. The End of an Era: A Short Film About The Last Day of Hot Metal Typesetting at The New York Times (1978) Open Culture, 2015
  5. Twilight of the Velocipede: Typesetting Races before the Age of Linotype The Public Domain Review (Alex Wright), 2026