Material Insights · Understanding the Material World

Hydrogen direct reduction (green steel): Overview

What it does

The job the technology does for people, in a short paragraph

Hydrogen direct reduction turns iron ore into iron using hydrogen in place of coal or coke, so the main by-product is water rather than carbon dioxide. The solid sponge iron is then made into steel. In Sweden the HYBRIT pilot made the first sponge iron with fossil-free hydrogen in June 2021, and the first steel from it reached a customer that August [1].

as of 2026-11-11

How it works

The working principle in plain words, step by step

Iron ore is mostly iron bound to oxygen. In a direct reduction plant the ore stays solid while a hot reducing gas flows through it. Here the gas is hydrogen: it pulls the oxygen out of the iron oxide and leaves as water vapour, which can be condensed. What remains is porous metallic iron, called sponge iron or direct reduced iron. The reaction itself uses 54 kg of hydrogen per tonne of iron made from hematite [8]; unused hydrogen is recycled, mixed with fresh hydrogen and reheated [8]. For green steel the hydrogen comes from splitting water by electrolysis with fossil-free electricity [2], and HYBRIT has built a pilot store for it beside its plant [1]. The sponge iron is then melted and refined into steel.

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Hydrogen to reduce hematite to one tonne of iron, stoichiometric minimum54kg/t2020[8][7]
World direct reduced iron output, all reducing gases151Mt2025[5]
Share of direct reduced iron made with natural gas65.1%2025[5]
World crude steel output1849Mt2025[6]
Carbon dioxide per tonne of crude steel, world average1.92t CO2/t2024[6]
Steel industry share of world carbon dioxide emissions7%2021[2]

as of 2026-11-11. The 54 kg is a fixed chemical amount, dated by the 2020 paper that gives it [8] (SteelWatch gives the same figure per tonne of direct reduced iron [7]); the 7% share is from a June 2021 press release that says "currently" [2]; the 1.92 t figure is in the source's section on 2024 steel industry performance [6].

Where it is used

The main places and products the technology is found in

  • Pilot production of sponge iron at Luleå, Sweden, since 2020 [1]
  • Fossil-free steel for vehicle makers, first delivered to the Volvo Group in 2021 [3]
  • Large plants under construction, such as Stegra's at Boden, Sweden [5]
  • Hot briquetted iron made with pure hydrogen at Circored, Trinidad, from 1999 [4]

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
Pilot plants only in operation; Stegra's 2.1 Mt a year hydrogen plant at Boden, Sweden, was under construction in December 2025 [5]
Made per year
All direct reduced iron, mostly made with natural gas or coal: 151.0 Mt in 2025 [5]
Unit
Mt
Year
2025
Note
No source opened gives the output made with hydrogen alone; the Midrex statistics report no hydrogen-based total [5]. HYBRIT's pilot had made about 100 t by June 2021 [2].

as of 2026-11-11

Sources

  1. HYBRIT: Facts and milestones HYBRIT (SSAB, LKAB and Vattenfall)
  2. HYBRIT: SSAB, LKAB and Vattenfall first in the world with hydrogen-reduced sponge iron Vattenfall, 2021, press release of 21 June 2021
  3. HYBRIT: The world's first fossil-free steel ready for delivery Vattenfall, 2021, press release of 18 August 2021
  4. Experiences from the Circored plant in Trinidad (page 4 of "Circored fine ore direct reduction: a proven process to decarbonize steelmaking") stahleisen.de (Stahl und Eisen)
  5. 2025 World Direct Reduction Statistics Midrex Technologies, 2026
  6. World Steel in Figures 2026 World Steel Association, 2026
  7. SteelWatch Explainer: Why smart use of green hydrogen is critical for steel decarbonisation SteelWatch, 2025
  8. Hydrogen Ironmaking: How It Works (Patisson and Mirgaux, Metals 10(7), 922) MDPI, 2020