Iron suspension bridge: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs 5- Fe Iron ore criticality low Wrought iron chains carry the load: Finley used hand-forged loops [1], and Menai hangs from 16 chains of 935 bars each [2].
- Tm Timber criticality low Early decks, stringers and some towers were timber, as at Jacob's Creek [1].
- Stn Crushed stone criticality low Masonry towers and anchorages, as at Menai, hold the chains up and down.
- St Steel criticality low Successor bridges hang from steel wire cables, first galvanised at Brooklyn [4].
- Zn Zinc criticality low Galvanising coats cable wires with zinc against rust, first done at Brooklyn [4].
as of 2026-11-11. Each Menai chain weighs 121 t [2]; no source gives amounts per metre of span. Criticality is the writer's judgement: all inputs are common.
Critical materials
The materials whose supply could hold it back
- No scarce material held these bridges back; the limits were the quality of wrought iron and of the forging.
- Rust was a constant threat: Menai's iron was soaked in linseed oil between manufacture and use to protect it [2].
as of 2026-11-11
Sources
- Schuylkill Falls Chain Suspension Bridge (1809) (Frank Griggs, Jr.), STRUCTURE magazine, March 2016 STRUCTURE magazine (NCSEA, CASE and SEI), 2016
- Menai crossings Institution of Civil Engineers
- Brooklyn Bridge American Society of Civil Engineers, Historic Landmarks