Knitting frame: Overview
What it does
The job the technology does for people, in a short paragraph
A knitting machine makes stretchy fabric from loops of yarn, adding a whole row of loops at a time instead of one stitch at a time by hand [2]. William Lee built the first, the stocking frame, in 1589 [1]. Its descendants make socks, hosiery, knitwear and sportswear; about 135,000 electronic flat knitting machines were shipped in 2024 [5].
as of 2026-11-11
How it works
The working principle in plain words, step by step
The stocking frame has a horizontal row of needles with springy hooks, called beards [3]. Thin, notched steel plates called sinkers sit between the needles [3]. The knitter lays yarn across the needles and the sinkers push it down into a loop around each needle. A presser bar then closes all the beards at once [3], so the row of old loops can be slid over the hooks and off, leaving the new loops held. The knitter works the frame with foot pedals and hand levers [2]. Each cycle adds one full row of stitches [2]. Modern machines use powered latch needles, arranged in a circle to make tubes of fabric or in flat beds controlled electronically.
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Needles per inch on the first frames | 8 | needles per inch | – | [1] |
| Needles per inch, about | 38 | needles per inch | 1750 | [1] |
| Electronic flat knitting machines shipped worldwide | 135,000 | machines | 2024 | [5] |
| Large circular knitting machines shipped worldwide | 28,000 | machines | 2024 | [5] |
| China's share of electronic flat knitting machine shipments | 82 | % | 2024 | [5] |
as of 2026-11-11
Where it is used
The main places and products the technology is found in
- Socks, stockings and hosiery
- Jumpers, cardigans and other knitwear
- Jersey fabric for T-shirts, sportswear and underwear, made on circular machines
- Shaped knitted parts such as shoe uppers, made on flat machines
as of 2026-11-11
Scale today
How much of it there is now: units in use, made each year and who uses it
- Made per year
- About 135,000 electronic flat and 28,000 large circular knitting machines shipped [5]
- Unit
- knitting machines
- Year
- 2024
- Note
- ITMF shipment statistics; the installed base is not counted.
as of 2026-11-11
Sources
- Inventions from Nottingham: The Stocking Frame Nottinghamshire Historic Environment Record, Nottinghamshire County Council, 2026
- The Knitting Frame Strutt's North Mill, Belper
- Stocking Knitting Frame and Accessories by Cooper Corah and Sons Science Museum Group Collection
- Global Textile Machinery Shipments Show Mixed Performance in 2024 (results of the ITMF International Textile Machinery Shipment Statistics, vol. 47) International Textile Manufacturers Federation (ITMF), 2025