Material Insights · Understanding the Material World

Lead chamber sulphuric acid process

Burning sulphur with nitre in lead-lined rooms made sulphuric acid cheap for the first time.

Making materials · Chemicals · No. 10

  • Medieval and early modern
  • Readiness 9 of 9
  • Process
Making materials · Technology

Rooms lined with sheet lead made the most important industrial acid cheap, and still made a quarter of it as late as 1946.

Chart: Illustration: Lead chamber sulphuric acid process

Where it comes from

Chart: Map of where it comes from

Joshua Ward burnt sulphur with nitre to make acid from 1740, but it was scarce and dear. In 1746 John Roebuck, a Birmingham physician, moved the reaction into large lead-lined rooms.

Three things to know
  1. Roebuck's chamber acid sold for about a quarter of the price of the acid Ward made in small batches.
  2. The chambers could only make acid of about 35% strength, and the process could not go above about 78% without special treatment.
  3. As late as 1946 the chamber process still made 25% of the sulphuric acid manufactured.
The journey
  1. 1 SulphurSulphur or a sulphur ore is burnt to sulphur dioxide
  2. 2 ChambersThe gas enters lead-lined rooms with steam and nitrogen oxides
  3. 3 OxidationNitrogen oxides carry oxygen from the air to the sulphur dioxide
  4. 4 Chamber acidDilute acid collects on the floor of the chambers
  5. 5 TowersTowers recover the nitrogen oxides and strengthen the acid
Go deeper pick a tab to open it in full