Material Insights · Understanding the Material World

Lidar: Overview

What it does

The job the technology does for people, in a short paragraph

Lidar, short for light detection and ranging, measures distance by timing pulses of laser light that bounce back from a target [3]. Swept across a scene, these ranges build a 3D map. It began in the early 1960s, soon after the laser was invented [1], with the first ranging to the Moon in 1962 [1]. Today it maps land, coasts and the atmosphere [3, 6] and is becoming a key sensor for self-driving cars [1].

as of 2026-11-11

How it works

The working principle in plain words, step by step

A lidar instrument consists mainly of a laser, a scanner and a special GPS receiver [3]. The laser fires short pulses of light, usually near-infrared for mapping land [3]. When a pulse meets the ground, a tree or a building, part of the light is reflected back to a sensor [3]. Light travels at a fixed, known speed, so the time the pulse takes to go out and return gives the distance. On an aircraft, GPS and an inertial measurement unit record where the instrument is and which way it points, so each range becomes a point with a known position [3]. Bathymetric lidar uses green light, which passes into water, to reach the seabed [3]. Pointed at the sky, lidar picks up light scattered back by dust and droplets, which shows cloud heights and aerosol layers [6].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Energy per pulse of the ruby laser used for the first laser ranging to the Moon50J1962[1]
Wavelength of the carbon dioxide laser in the first coherent Doppler lidar10.6micrometres1970[1]
Minimum point density required for US 3D Elevation Program lidar data (year is the fact sheet's publication year)2points per m22026[4]
National benefits of the US 3D Elevation Program, conservatively, as estimated in the 2012 National Enhanced Elevation Assessment690million USD per year2012[4]

as of 2026-11-11. The benefits figure comes from the 2012 National Enhanced Elevation Assessment, as the 2026 USGS fact sheet states [4]; the point density is a programme requirement with no data year, so it carries the fact sheet's publication year, 2026 [4].

Where it is used

The main places and products the technology is found in

  • Shoreline maps and flood and storm surge models [3]
  • National elevation maps, such as the US 3D Elevation Program [4]
  • Atmospheric research on clouds, aerosols and water vapour [6]
  • Wind sensing with Doppler lidar, first used to detect aircraft wake vortices [1]
  • Self-driving cars [1]
  • Space missions, such as the lidar on the Hayabusa asteroid probes launched in 2005 and 2015 [1]

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
No world count of lidar instruments was found
Unit
instruments
Note
The USGS aims to complete nationwide lidar coverage of the United States [4]; no share of land mapped worldwide was found.

as of 2026-11-11

Sources

  1. Laser radar: historical prospective, from the East to the West Vasyl Molebny, Paul McManamon, Ove Steinvall, Takao Kobayashi and Weibiao Chen, Optical Engineering 56(3), 031220 (SPIE), 2016
  2. What is lidar? National Ocean Service, NOAA
  3. The 3D Elevation Program, Supporting North Dakota's Economy (Fact Sheet 2026-3006) U.S. Geological Survey (E. Guidero), 2026
  4. History of Lidar Development at the National Center for Atmospheric Research NCAR Earth Observing Laboratory