Material Insights · Understanding the Material World

Lime burning

Heating limestone drives off carbon dioxide to make quicklime for mortar, plaster and steel.

Making materials · Ceramics, glass and cement · No. 390

  • Prehistoric
  • Readiness 9 of 9
  • Process
Making materials · Technology

People were burning limestone into lime 12,000 years ago, and every tonne of lime still releases 0.785 t of carbon dioxide from the rock.

Chart: Illustration: Lime burning

Where it comes from

Chart: Map of where it comes from

Foragers in the Levant made small amounts of lime plaster before farming began. By 12,000 years ago a Natufian community at Nahal Ein Gev II was covering its dead with lime plaster made on purpose.

Three things to know
  1. Burning one tonne of lime releases 0.785 t of carbon dioxide from the limestone itself, whatever the fuel.
  2. Parallel flow shaft kilns use about 3.6 to 4.2 GJ of fuel per tonne, less than long rotary kilns at 6.4 to 9.2 GJ.
  3. Steelmaking is the largest market for lime in the United States, ahead of chemical and industrial uses.
The journey
  1. 1 QuarryLimestone, calcium carbonate, is quarried and crushed
  2. 2 KilnHeated to 900 to 1,200 °C, it gives off carbon dioxide
  3. 3 QuicklimeCalcium oxide leaves the kiln
  4. 4 HydratingWater turns it into hydrated lime, a dry powder
  5. 5 UseSteelmaking, chemicals, flue gas cleaning, building and water treatment
Go deeper pick a tab to open it in full