Material Insights · Understanding the Material World

Battery recycling (hydrometallurgical)

Spent batteries are shredded and leached so lithium, nickel and cobalt can go back into new cells.

Making materials · Recycling and capture · No. 30

  • Networked and AI age
  • Readiness 8 of 9
  • Process
Making materials · Technology

Even in 2030, two thirds of what battery recyclers process is expected to be factory scrap, not worn-out batteries.

Chart: Illustration: Battery recycling (hydrometallurgical)

Where it comes from

Chart: Map of where it comes from

Lithium-ion batteries went on sale in 1991, and an acid-leaching process for spent cells was published in 1998. Smelters began taking battery scrap in 2001, Umicore opened a dedicated plant in 2011, and most acid-leaching recyclers date from the mid-2010s.

Three things to know
  1. World capacity for battery pretreatment and material recovery grew 50% in 2023 alone.
  2. In 2023 recyclers recovered over 40% of the nickel and cobalt in available feedstock but only 20% of the lithium.
  3. EU law requires 50% of the lithium in waste batteries to be recovered by the end of 2027 and 80% by the end of 2031.
The journey
  1. 1 CollectSpent cells and factory scrap are gathered and sorted
  2. 2 DischargeCells are emptied of charge so they are safe to cut
  3. 3 ShredShredding and sieving give a black powder, black mass
  4. 4 LeachAcid dissolves lithium, nickel, cobalt and manganese
  5. 5 SeparateSolvent extraction and precipitation split the metals into salts
  6. 6 ReuseThe salts are made into new cathode material
Covered in Cost, trade-offs and resources: why the best design is rarely the strongestEngineering
Go deeper pick a tab to open it in full